Distributions of crystal size from DSC melting traces for polyethylenesLIJUN FENG; KAMAL, Musa R.Canadian journal of chemical engineering. 2004, Vol 82, Num 6, pp 1239-1251, issn 0008-4034, 13 p.Article

Runner balancing by a direct genetic optimization of shrinkageALAM, Kevin; KAMAL, Musa R.Polymer engineering and science. 2004, Vol 44, Num 10, pp 1949-1959, issn 0032-3888, 11 p.Article

Polymer-clay nanocomposites based on blends of polyamide-6 and polyethyleneMEHRABZADEH, Mahmood; KAMAL, Musa R.Canadian journal of chemical engineering. 2002, Vol 80, Num 6, pp 1083-1092, issn 0008-4034, 10 p.Article

Effect of a Chain Extender on the Rheological and Mechanical Properties of Biodegradable Poly(lactic acid)/Poly[(butylene succinate)-co-adipate] BlendsESLAMI, Hassan; KAMAL, Musa R.Journal of applied polymer science (Print). 2013, Vol 129, Num 5, pp 2418-2428, issn 0021-8995, 11 p.Article

Elongational Rheology of Biodegradable Poly(lactic acid)/Poly[(butylene succinate)-co-adipate] Binary Blends and Poly(lactic acid)/Poly[(butylene succinate)-co-adipate]/Clay Ternary NanocompositesESLAMI, Hassan; KAMAL, Musa R.Journal of applied polymer science. 2013, Vol 127, Num 3, pp 2290-2306, issn 0021-8995, 17 p.Article

Morphology of PA-6 Vibration Welded Joints and Its Effect on Weld StrengthCHUNG, Young-Mi; KAMAL, Musa R.Polymer engineering and science. 2008, Vol 48, Num 2, pp 240-248, issn 0032-3888, 9 p.Article

Thermally stable phosphonium-montmorillonite organoclaysCALDERON, Jorge Uribe; LENNOX, Bruce; KAMAL, Musa R et al.Applied clay science. 2008, Vol 40, Num 1-4, pp 90-98, issn 0169-1317, 9 p.Article

Crystal Morphology of Hydrogenated Castor Oil in the Crystallization of Oil-in-Water Emulsions: Part II. Effect of ShearDINGZHENG YANG; HRYMAK, Andrew N; KAMAL, Musa R et al.Industrial & engineering chemistry research. 2011, Vol 50, Num 20, pp 11594-11600, issn 0888-5885, 7 p.Article

Estimation of Stresses Required for Exfoliation of Clay Particles in Polymer NanocompositesBORSE, Nitin K; KAMAL, Musa R.Polymer engineering and science. 2009, Vol 49, Num 4, pp 641-650, issn 0032-3888, 10 p.Conference Paper

Crystalline spherulitic growth kinetics during shear for linear low-density polyethyleneTAVICHAI, Orasa; LIJUN FENG; KAMAL, Musa R et al.Polymer engineering and science. 2006, Vol 46, Num 10, pp 1468-1475, issn 0032-3888, 8 p.Article

Three-Dimensional Fiber Orientation in Vibration Welded Joints of Glass Fiber Reinforced Polyamide-6KAMAL, Musa R; CHUNG, Young-Mi; GOMEZ, Rodolfo et al.Polymer composites. 2008, Vol 29, Num 9, pp 954-963, issn 0272-8397, 10 p.Article

A generalized equation for the prediction of melting temperatures of homopolymers and copolymersKAMAL, Musa R; LIJUN FENG; TAO HUANG et al.Canadian journal of chemical engineering. 2002, Vol 80, Num 3, pp 432-442, issn 0008-4034, 11 p.Article

CIRCULAR DICHROISM SPECTRE OF CIS,CIS-(CO (OO) (N)₂ (PY)₂)⁺-TYPE COMPLEXESFUJINAMI S; TSUJI K; MUSA R et al.1982; BULL. CHEM. SOC. JPN; ISSN 0009-2673; JPN; DA. 1982; VOL. 55; NO 2; PP. 617-618; BIBL. 5 REF.Article

Effect of Polyamide 66 on the Mechanical and Thermal Properties of Post-Industrial Waste Polyamide 6GHASEMI, Hesam; MIRZADEH, Amin; BATES, Philip J et al.Polymer-plastics technology and engineering (Softcover ed). 2014, Vol 53, Num 15-17, pp 1794-1803, issn 0360-2559, 10 p.Article

Surface Energy of Modified Nanoclays and Its Effect on Polymer/Clay NanocompositesKAMAL, Musa R; URIBE CALDERON, Jorge; LENNOX, R. Bruce et al.Journal of adhesion science and technology. 2009, Vol 23, Num 5, pp 663-688, issn 0169-4243, 26 p.Article

Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AASAFFAR, Amir; CARREAU, Pierre J; AJJI, Abdellah et al.Journal of membrane science (Print). 2014, Vol 462, pp 50-61, issn 0376-7388, 12 p.Article

The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranesSAFFAR, Amir; AJJI, Abdellah; CARREAU, Pierre J et al.Polymer (Guildford). 2014, Vol 55, Num 14, pp 3156-3167, issn 0032-3861, 12 p.Article

Hydrophilic modification of polypropylene microporous membranes by grafting TiO₂ nanoparticles with acrylic acid groups on the surfaceSAFFAR, Amir; CARREAU, Pierre J; KAMAL, Musa R et al.Polymer (Guildford). 2014, Vol 55, Num 23, pp 6069-6075, issn 0032-3861, 7 p.Article

Morphology Development in the Gate Region of Microinjection-Molded ThermoplasticsCHU, Jing-Song; KAMAL, Musa R; DERDOURI, Abdessalem et al.Polymer engineering and science. 2012, Vol 52, Num 4, pp 787-794, issn 0032-3888, 8 p.Article

The Effects of Nanoclay Dispersion Levels and Processing Parameters on the Dynamic Vulcanization of TPV Nanocomposites Based on PP/EPDM Prepared by Reactive ExtrusionMIRZADEH, Amin; LAFLEUR, Pierre G; KAMAL, Musa R et al.Polymer engineering and science. 2012, Vol 52, Num 5, pp 1099-1110, issn 0032-3888, 12 p.Article

EVALUATION OF VARIOUS SURFACTANTS AND COMPATIBILIZERS FOR PREPARATION OF PS/CLAY NANOCOMPOSITES BY MELT COMPOUNDINGURIBE-CALDERON, Jorge; KAMAL, Musa R.Journal of polymer engineering. 2010, Vol 30, Num 5-7, pp 377-411, issn 0334-6447, 35 p.Article

Melt compounding of different grades polystyrene with organoclay. Part 3: Mechanical propertiesTANOUE, Shuichi; UTRACKI, Leszek A; GARCIA-REJON, Andres et al.Polymer engineering and science. 2005, Vol 45, Num 6, pp 827-837, issn 0032-3888, 11 p.Article

A Parlay and SPIRITS-based architecture for service mediationKOZIK, Jack; UNMEHOPA, Musa R; VEMURI, Kumar V et al.Bell Labs technical journal. 2003, Vol 7, Num 4, pp 105-122, issn 1089-7089, 18 p.Article

Microstructure and Properties of Poly(ethylene terephthalate)/Organoclay Nanocomposites Prepared by Water-Assisted Extrusion: Effect of Organoclay ConcentrationDINI, Maryam; MOUSAVAND, Tahereh; CARREAU, Pierre J et al.Polymer engineering and science. 2014, Vol 54, Num 8, pp 1879-1892, issn 0032-3888, 14 p.Article

Melt processing effects on the structure and mechanical properties of PA-6/clay nanocompositesBORSE, Nitin K; KAMAL, Musa R.Polymer engineering and science. 2006, Vol 46, Num 8, pp 1094-1103, issn 0032-3888, 10 p.Conference Paper