Crystallization of CaTiO₃ by sol-gel synthesis and rapid thermal processingHOLLIDAY, Samuel; STANISHEVSKY, Andrei.Surface & coatings technology. 2004, Vol 188-89, pp 741-744, issn 0257-8972, 4 p.Conference Paper

Electrodeposition of porous hydroxyapatite/calcium silicate composite coating on titanium for biomedical applicationsYONG HUANG; SHUGUANG HAN; XIAOFENG PANG et al.Applied surface science. 2013, Vol 271, pp 299-302, issn 0169-4332, 4 p.Article

Improved adaptability of PEEK by Nb doped graphite-like carbon composite coatings for bio-tribological applicationsJINXIA HUANG; SHANHONG WAN; BIN LIU et al.Surface & coatings technology. 2014, Vol 247, pp 20-29, issn 0257-8972, 10 p.Article

Characterization of Zr-based hard coatings for medical implant applicationsBALACEANU, M; PETREUS, T; BRAIC, V et al.Surface & coatings technology. 2010, Vol 204, Num 12-13, pp 2046-2050, issn 0257-8972, 5 p.Conference Paper

Corrosion performance of the plasma nitrided 316L stainless steelGIL, Linda; BRÜHL, Sonia; JIMENEZ, Lorena et al.Surface & coatings technology. 2006, Vol 201, Num 7, pp 4424-4429, issn 0257-8972, 6 p.Conference Paper

Effect of treatment temperature on the biocompatibility and mechanical strength of hydroxyapatite coating formed on titanium using calcium phosphate slurryOHTSU, Naofumi; TAKAHARA, Toyofumi; HIRANO, Mitsuhiro et al.Surface & coatings technology. 2014, Vol 239, pp 185-190, issn 0257-8972, 6 p.Article

Microstructural and biological properties of nanocrystalline diamond coatingsNARAYAN, R. J; WEI, W; RAMAMURTI, R et al.Diamond and related materials. 2006, Vol 15, Num 11-12, pp 1935-1940, issn 0925-9635, 6 p.Conference Paper

Antenna design and channel modeling in the BAN context—part I: antennas : Body Area Networks applications and technologiesROBLIN, Christophe; LAHEURTE, Jean-Marc; D'ERRICO, Raffaele et al.Annales des télécommunications. 2011, Vol 66, Num 3-4, pp 139-155, issn 0003-4347, 17 p.Article

The Improvement of the Noninvasive Power-Supply System Using Magnetic Coupling for Medical ImplantsSUZUKI, Shin-Nosuke; ISHIHARA, Manabu; KOBAYASHI, Yukio et al.IEEE transactions on magnetics. 2011, Vol 47, Num 10, pp 2811-2814, issn 0018-9464, 4 p.Conference Paper

Visual Prosthesis : Microelectronic implants that provide identification of simple objects and motion detection for blind patients have been tested and evaluated; further development is needed for face recognition and reading implantsWEILAND, James D; HUMAYUN, Mark S.Proceedings of the IEEE. 2008, Vol 96, Num 7, pp 1076-1084, issn 0018-9219, 9 p.Article

Advanced biomaterials for skeletal tissue regeneration : Instructive and smart functionsBARRERE, F; MAHMOOD, T. A; DE GROOT, K et al.Materials science & engineering. R, Reports. 2008, Vol 59, Num 1-6, pp 38-71, issn 0927-796X, 34 p.Article

ARXPS and high energy XPS characterisation of titanium surfaces for medical implantsSUNDING, Martin F; JENSEN, Ingvild T; STENSTAD, Per M et al.Surface and interface analysis. 2008, Vol 40, Num 3-4, pp 751-753, issn 0142-2421, 3 p.Conference Paper

Depth profiling by GDOES: application of hydrogen and d.c. bias voltage corrections to the analysis of thin oxide filmsMICHLER, J; AEBERHARD, M; VELTEN, D et al.Thin solid films. 2004, Vol 447-48, pp 278-283, issn 0040-6090, 6 p.Conference Paper

Gelled versus nongelled phantom material for measurement of MRI-induced temperature increases with bioimplantsPARK, S. M; NYENHUIS, J. A; SHELLOCK, F. G et al.IEEE transactions on magnetics. 2003, Vol 39, Num 5, pp 3367-3371, issn 0018-9464, 5 p., 2Conference Paper

An abiotically catalyzed glucose fuel cell for powering medical implants : Reconstructed manufacturing protocol and analysis of performanceKERZENMACHER, S; DUCREE, J; ZENGERLE, R et al.Journal of power sources. 2008, Vol 182, Num 1, pp 66-75, issn 0378-7753, 10 p.Article

Audits de bon usage: les dispositifs médicaux implantables sont aussi concernés = Audits of good practice: Implantable medical devices are also concernedLEROY, B; BERRY, J; COURSIER, S et al.Annales pharmaceutiques françaises. 2012, Vol 70, Num 5, pp 298-305, issn 0003-4509, 8 p.Article

Electrodeposition of hydroxyapatite coating on Mg-4.0Zn-1.0Ca-0.6Zr alloy and in vitro evaluation of degradation, hemolysis, and cytotoxicityGUAN, Ren-Guo; JOHNSON, Ian; TONG CUI et al.Journal of biomedical materials research. Part A. 2012, Vol 100, Num 4, pp 999-1015, issn 1549-3296, 17 p.Article

Numerical Characterization and Link Budget Evaluation of Wireless Implants Considering Different Digital Human PhantomsSANI, Andrea; ALOMAINY, Akram; YANG HAO et al.IEEE transactions on microwave theory and techniques. 2009, Vol 57, Num 10, pp 2605-2613, issn 0018-9480, 9 p.Article

Modeling and Characterization of Biotelemetric Radio Channel From Ingested Implants Considering Organ Contents : Antennas and propagation on body-centric wireless communicationsALOMAINY, Akram; YANG HAO.IEEE transactions on antennas and propagation. 2009, Vol 57, Num 4, pp 999-1005, issn 0018-926X, 7 p., 1Article

Batteryless Transceiver Prototype for Medical Implant in 0.18-μm CMOS TechnologyCHEN, Hsiao-Chin; YEN, Ming-Yu; WU, Qi-Xiu et al.IEEE transactions on microwave theory and techniques. 2014, Vol 62, Num 1, pp 137-147, issn 0018-9480, 11 p.Article

Energy harvesting by implantable abiotically catalyzed glucose fuel cellsKERZENMACHER, S; DUCREE, J; ZENGERLE, R et al.Journal of power sources. 2008, Vol 182, Num 1, pp 1-17, issn 0378-7753, 17 p.Article

Body Implanted Medical Device Communications : Medical information and communications technologiesYAZDANDOOST, Kamya Yekeh; KOHNO, Ryuji.IEICE transactions on communications. 2009, Vol 92, Num 2, pp 410-417, issn 0916-8516, 8 p.Article

Biocompatible/Bioabsorbable Silver Nanocomposite CoatingsQURESHI, Ammar T; MONROE, W. Todd; LOPEZ, Mandi J et al.Journal of applied polymer science (Print). 2011, Vol 120, Num 5, pp 3042-3053, issn 0021-8995, 12 p.Article

A CMOS Low-Power Transceiver With Reconfigurable Antenna Interface for Medical Implant ApplicationsCOPANI, Tino; MIN, Seungkee; SHASHIDHARAN, Sridhar et al.IEEE transactions on microwave theory and techniques. 2011, Vol 59, Num 5, pp 1369-1378, issn 0018-9480, 10 p.Article

A Sub-100 μW MICS/ISM Band Transmitter Based on Injection-Locking and Frequency MultiplicationPANDEY, Jagdish; OTIS, Brian P.IEEE journal of solid-state circuits. 2011, Vol 46, Num 5, pp 1049-1058, issn 0018-9200, 10 p.Conference Paper