Pascal and Francis Bibliographic Databases

Help

Search results

Your search

ct.\*:("Moulding")

Document Type [dt]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Publication Year[py]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Discipline (document) [di]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Language

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Author Country

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Origin

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Results 1 to 25 of 9603

  • Page / 385

Export

Selection :

  • and

Crystallization kinetics of virgin and processed poly(lactic acid)PANTANI, R; DE SANTIS, F; SORRENTINO, A et al.Polymer degradation and stability. 2010, Vol 95, Num 7, pp 1148-1159, issn 0141-3910, 12 p.Article

Polyhydroxybutyrate/Acrylonitrile-g-(Ethylene-co-Propylene-co-Diene)-g-Styrene Blends : Their Morphology and Thermal and Mechanical BehaviorDE CARVALHO, Fabiana Pires; QUENTAL, Antonio Carlos; FELISBERTI, Maria Isabel et al.Journal of applied polymer science (Print). 2008, Vol 110, Num 2, pp 880-889, issn 0021-8995, 10 p.Article

Poly-para-phenylene-copolymers (PPP) for extrusion and injection moulding Part 1 ― molecular and rheological differencesALMAJID, A; FRIEDRICH, K; NOLL, A et al.Plastics, rubber and composites. 2013, Vol 42, Num 3, pp 123-128, issn 1465-8011, 6 p.Article

Oxygen and Carbon Dioxide Permeability of EAA/PEO Blends and MicrolayersPETHE, V. V; WANG, H. P; HILTNER, A et al.Journal of applied polymer science (Print). 2008, Vol 110, Num 3, pp 1411-1419, issn 0021-8995, 9 p.Article

Effects of the molecular structure of impact modifier and compatibilizer on the toughening of PBT/SBS/PS-GMA blendsCANTO, L. B; HAGE, E; PESSAN, L. A et al.Journal of applied polymer science. 2006, Vol 102, Num 6, pp 5795-5807, issn 0021-8995, 13 p.Article

Properties of pet-pen blends produced by extrusion and injection blow- moldingSANCHEZ-SOLIS, A; GARCIA-REJON, A; MARTINEZ-RICHA, A et al.Journal of polymer engineering. 2005, Vol 25, Num 6, pp 553-570, issn 0334-6447, 18 p.Article

Reborn HPM launches new injection & extrusion machineryKNIGHTS, Mikell.Plastics technology. 2002, Vol 48, Num 10, pp 53-55, issn 0032-1257, 2 p.Article

Improved design of shearing sections with new calculation models based on 3D finite-element simulationsPOTENTE, Helmut; TÖBBEN, Wilhelm H.Macromolecular materials and engineering (Print). 2002, Vol 287, Num 11, pp 808-814, issn 1438-7492, 7 p.Article

Die swell of thermoplastic polyurethanes: A peculiar behaviorDUFRANCATEL-VEILLER, L; LACRAMPE, M. F; PABIOT, J et al.Journal of applied polymer science. 2001, Vol 80, Num 10, pp 1710-1724, issn 0021-8995Article

Microplasturgie = Plastics microtechnologyROY, Pierre.Techniques de l'ingénieur. Plastiques et composites. 2001, Vol AM4, Num AM3701, pp AM3701.1-AM3701.15, issn 1762-8776, AM3701.1 [Article

Microinjection molding of polyamide 6FERREIRA, Tânia; LOPES, Paulo E; PONTES, António José et al.Polymers for advanced technologies. 2014, Vol 25, Num 8, pp 891-895, issn 1042-7147, 5 p.Article

The Role of Polycarbonate Molecular Weight in the Poly(L-lactide) Blends Compatibilized With Poly(butylene succinate-co-L-lactate)WANG, Y; CHIAO, S. M; LAI, M.-T et al.Polymer engineering and science. 2013, Vol 53, Num 6, pp 1171-1180, issn 0032-3888, 10 p.Article

Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical propertiesCARRASCO, F; PAGES, P; GAMEZ-PEREZ, J et al.Polymer degradation and stability. 2010, Vol 95, Num 2, pp 116-125, issn 0141-3910, 10 p.Article

Dies with adjustable flow channel geometries open up new processing possibilities in extrusionGROSS, H.Plastics, rubber and composites. 2008, Vol 37, Num 2-4, pp 80-87, issn 1465-8011, 8 p.Conference Paper

A new technique for preparing polyethylene/polystyrene blends with gradient structureNING, Nan-Ying; ZHU, Yong-Bin; ZHANG, Xiao-Qing et al.Journal of applied polymer science. 2007, Vol 105, Num 5, pp 2737-2743, issn 0021-8995, 7 p.Article

Use of nonpolar processing aids to improve the efficiencies of extruded polyolefinsMARSHALL, Niall; VISSER, Gideon.Journal of vinyl & additive technology. 2007, Vol 13, Num 3, pp 155-158, issn 1083-5601, 4 p.Article

Recent advances in the numerical simulation of polymer processingMITSOULIS, Evan.Les Cahiers de rhéologie (Paris). 2000, Vol 17, Num 1, pp 1-13, issn 1149-0039Conference Paper

Effect of the processing method on the mechanical properties and morphology of compatibilized PA6/LDPE blendsAGRAWAL, Pankaj; ARAUJO, Edcleide M; MELO, Tomas J. A et al.Journal of materials science. 2008, Vol 43, Num 13, pp 4443-4449, issn 0022-2461, 7 p.Article

Meiki direct lock electric machine goes into productionBP & R. British plastics and rubber. 2001, Num MAR, pp 4-5, issn 0307-6164Article

Melt temperature variations in the barrels of an injection moulder and a twin screw extruderSOMBATSOMPOP, N; CHAIWATTANPIPAT, W; PANAPOY, M et al.Materials research innovations (Print). 2000, Vol 3, Num 5, pp 271-275, issn 1432-8917Article

A novel apparatus combining polymer extrusion processing and x-ray scatteringKUNPENG CUI; YANPING LIU; LINGPU MENG et al.Polymer testing. 2014, Vol 33, pp 40-47, issn 0142-9418, 8 p.Article

Encapsulated Phase Structure and Morphology Evolution During Quiescent Annealing in Ternary Polymer Blends with PA6 as MatrixRUI DOU; WEI WANG; YAN ZHOU et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 4, issn 0021-8995, 39937.1-39937.9Article

Flow instability of semicrystalline polymer melt during micro-injection moldingSUN KYOUNG KIM; KIM, Dae-Jin; JAE SUNG JUNG et al.Journal of micromechanics and microengineering (Print). 2014, Vol 24, Num 8, issn 0960-1317, 085015.1-085015.17Article

Improvement of the thermal stability of branched poly(lactic acid) obtained by reactive extrusionCARRASCO, F; CAILLOUX, J; SANCHEZ-JIMENEZ, P. E et al.Polymer degradation and stability. 2014, Vol 104, pp 40-49, issn 0141-3910, 10 p.Article

In Situ Control of Co-Continuous Phase Morphology for PS/PS-co-TMI/PA6 BlendZHANG, Cai-Liang; TAO ZHANG; FENG, Lian-Fang et al.Journal of applied polymer science (Print). 2014, Vol 131, Num 6, issn 0021-8995, 39972.1-39972.7Article

  • Page / 385