Effects of Nickel Coating of Mold Plates on Star Crack DefectsOZTURK, Sabri; MERIH ARIKAN, Mustafa; KACAR, Yilmaz et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2013, Vol 44, Num 3, pp 706-710, issn 1073-5615, 5 p.Article

Predicting the Effect of Mo, Ni, and Si on the Bainitic StasisHAO CHEN; VAN DER ZWAAG, Sybrand.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 8, pp 3429-3437, issn 1073-5623, 9 p.Article

Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloyFERREIRA SANTOS, Sydney; DE CASTRO, José Fernando R; ISHIKAWA, Tomaz T et al.Journal of materials science. 2008, Vol 43, Num 8, pp 2889-2894, issn 0022-2461, 6 p.Article

The Effects of Nickel/Tin Ratio on Cu Induced Surface Hot Shortness in FeLAN YIN; SAMPSON, Erica; NAKANO, Jinichiro et al.Oxidation of metals. 2011, Vol 76, Num 5-6, pp 367-383, issn 0030-770X, 17 p.Article

Characterization of Nickel Diffusion and its Effect on the Microstructure of Nickel PM SteelsTOUGAS, Bernard; BLAIS, Carl; CHAGNON, François et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 2, pp 754-765, issn 1073-5623, 12 p.Article

Electrochemical studies on the effect of nickel on copper anode passivation in a copper sulphate solutionJARJOURA, G; KIPOUROS, G. J.Canadian metallurgical quarterly. 2006, Vol 45, Num 3, pp 283-293, issn 0008-4433, 11 p.Article

The development of the corrosion resistance of an Fe-Zn alloy coating on the basis of the behaviour of the corrosion product = Développement de la résistance à la corrosion d'un revêtement d'alliage Fe-Zn, sur la base du comportement du produit de corrosionSUZUKI, I; ENJUZI, M.Corrosion science. 1986, Vol 26, Num 5, pp 349-355, issn 0010-938XArticle

The Effect of Minor Addition of Ni on the Microstructural Evolution and Mechanical Properties of Suction Cast Al-0.14 at. pct Sc Binary AlloyNANDI, Proloy; SUWAS, Satyam; KUMAR, Subodh et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 6, pp 2591-2603, issn 1073-5623, 13 p.Article

Influence of nickel boride additions on sintering behaviors of injection moulded 17-4 PH stainless steel powderGÜLSOY, H. Özkan.Scripta materialia. 2005, Vol 52, Num 3, pp 187-192, issn 1359-6462, 6 p.Article

Electrical resistance measurement in the activated sintering process of the nickel-doped tungsten-powder compact = Mesure de la résistance électrique dans le processus de frittage activé d'un compact de poudre de tungstène dopée avec du nickelIN-HYUNG MOON; IN-SUP AHN; KYO-WOOK AHN et al.Journal of the less-common metals. 1986, Vol 123, pp 241-250, issn 0022-5088Article

Effect of nickel base superalloy composition on oxidation resistance in SO₂ containing, high pO₂ environmentsJALOWICKA, A; NOWAK, W; NAUMENKO, D et al.Materials and corrosion (1995). 2014, Vol 65, Num 2, pp 178-187, issn 0947-5117, 10 p.Article

The third-element effect in the oxidation of Ni-xCr-7Al (x = 0, 5, 10, 15 at.%) alloys in 1 atm O₂ at 900-1000 °CNIU, Y; ZHANG, X. J; WU, Y et al.Corrosion science. 2006, Vol 48, Num 12, pp 4020-4036, issn 0010-938X, 17 p.Article

The effects of manganese on the T-phase and creep resistance in Al―Si―Cu―Mg―Ni alloysFARKOOSH, A. R; PEKGULERYUZ, M.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 582, pp 248-256, issn 0921-5093, 9 p.Article

Determination of the W8 and AB5 defect levels in the diamond gapPEREIRA, R. N; GEHLHOFF, W; SOBOLEV, N. A et al.Journal of physics. Condensed matter (Print). 2001, Vol 13, Num 40, pp 8957-8964, issn 0953-8984Conference Paper

Internal gettering for Ni contamination in Czochralski silicon wafersSUEOKA, K; SADAMITSU, S; KOIKE, Y et al.Journal of the Electrochemical Society. 2000, Vol 147, Num 8, pp 3074-3077, issn 0013-4651Article

Majority-carrier capture cross section of amphoteric nickel center in silicon studied by isothermal;k capacitance transient spectroscopyTANAKA, S; MATSUSHITA, K; KITAGAWA, H et al.Japanese journal of applied physics. 1996, Vol 35, Num 9A, pp 4624-4625, issn 0021-4922, 1Article

Electrocatalytic activity of Ni-doped nanoporous carbons in the electrooxidation of propargyl alcoholGARCIA-CRUZ, Leticia; SAEZ, Alfonso; ANIA, Conchi O et al.Carbon (New York, NY). 2014, Vol 73, pp 291-302, issn 0008-6223, 12 p.Article

Slow emission of the 2.56 eV centre in synthetic diamondPEREIRA, E; SANTOS, L; PEREIRA, L et al.Diamond and related materials. 1994, Vol 4, Num 1, pp 53-58, issn 0925-9635Article

Thermoluminescence studies on CsCl:Ni crystalsSELVAN, P; SELVASEKARAPANDIAN, S.Materials chemistry and physics. 1994, Vol 37, Num 1, pp 94-96, issn 0254-0584Article

REFRACTORY METAL SELF-SUPPORTING PARTS MANUFACTURED BY PLASMA SPRAYING TECHNIQUES = FABRICATION DE PIECES AUTOPORTANTES EN METAL REFRACTAIRE PAR LES TECHNIQUES DE PROJECTION A CHAUDDANIAULT J; PARAYRE C.1983; THERMAL SPRAYING. INTERNATIONAL CONFERENCE. POSTER SHOW/1983/ESSEN; DEU; DUESSELDORF: DVS; DA. 1983; 5 P.; BIBL. 2 REF.; LOC. ISConference Paper

UTILIZACION DE OXIDO DE NIQUEL SINTERIZADO DE 90% DE NIQUEL, COMO AJUSTE DE LA COMPOSICION DEL BANO, EN LA PRODUCCION DE ACEROS INOXIDABLES = USE OF SINTERED NICKEL OXIDE WITH 90% NI TO ADJUST FINAL BATH COMPOSITION IN STAINLESS STEEL PRODUCTION = UTILISATION D'OXYDE NICKEL FRITTE, A 90% DE NI, POUR AJUSTER LA COMPOSITION DU BAIN FINAL DANS LA PRODUCTION D'ACIERS INOXYDABLESPEREZ B; ISIDRO A.1981; REV. METAL. (MADRID); ISSN 0034-8570; ESP; DA. 1981; VOL. 17; NO 3; PP. 153-158; ABS. ENGArticle

NICKEL MATRICES IN CEMENTED CARBIDESTRACEY VA; HALL NRV.1980; PMI, POWDER METALL. INT.; DEU; DA. 1980-08; VOL. 12; NO 3; PP. 132-133; BIBL. 13 REF.Conference Paper

Enhancing toughness of CrN coatings by Ni addition for safety-critical applicationsPUI CHING WO; MUNROE, Paul R; JIANG, Zhong-Tao et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 596, pp 264-274, issn 0921-5093, 11 p.Article

Comparative study of room temperature ferromagnetism in undoped and Ni-doped TiO₂ nanowires synthesized by solvothermal methodNGUYEN THI QUYNH HOA; DUONG NGOC HUYEN.Journal of materials science. Materials in electronics. 2013, Vol 24, Num 2, pp 793-798, issn 0957-4522, 6 p.Article

Enhanced sinterability and electrical properties of GdSmZr₂O₇ by addition of nickel oxideLIU, Zhan-Guo; OUYANG, Jia-Hu; SUN, Ke-Ning et al.Journal of power sources. 2013, Vol 228, pp 1-6, issn 0378-7753, 6 p.Article