Synthesis of Niobium Carbides from Ferroniobium by Mechanochemical MethodKANO, Junya; SOLIHIN; SATO, Nobuaki et al.ISIJ international. 2009, Vol 49, Num 3, pp 458-462, issn 0915-1559, 5 p.Article

Thermal Desorption Spectroscopy Evaluation of the Hydrogen-Trapping Capacity of NbC and NbN PrecipitatesWALLAERT, Elien; DEPOVER, Tom; ARAFIN, Muhammad et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 5, pp 2412-2420, issn 1073-5623, 9 p.Article

Crystallography and Morphology of Niobium Carbide in As-Cast HP-Niobium Reformer TubesBUCHANAN, Karl G; KRAL, Milo V.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 6, pp 1760-1769, issn 1073-5623, 10 p.Article

On the possibility of homogeneous composite materials production on niobium-carbide basePLOSHKIN, V.V; ULYANINA, I.Yu; FILONENKO, V.P et al.Metallovedenie i termičeskaâ obrabotka metallov. 1984, Vol 30, Num 8, pp 26-27, issn 0026-0819Article

Niobium carbide precipitation in microalloyed steelKLINKENBERG, Christian; HULKA, Klaus; BLECK, Wolfgang et al.Steel research international. 2004, Vol 75, Num 11, pp 744-752, issn 1611-3683, 9 p.Article

In-Situ Observation of Growth Behavior of Niobium Carbide during Dual-Phase Rapid Solidification of SUS347HYONEMURA, Mitsuharu; OSUKI, Takahiro; HIRATA, Hiroyuki et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 1, pp 113-118, issn 1073-5623, 6 p.Article

Effect of NbC on the microstructure and sinterability of Ti(C_0.7, N_0.3)-based cermetsWANG JUN; LIU YING; FENG YAN et al.International journal of refractory metals & hard materials. 2009, Vol 27, Num 3, pp 549-551, issn 0958-0611, 3 p.Article

Effect of atomic ordering on the heat capacity of non-stoichiometric niobium carbide = Einfluss der atomaren Ordnung auf die Waermekapazitaet von nichtstoechiometrischem NiobkarbidREMPEL, A.A; NAZAROVA, S.Z; GUSEV, A.I et al.Physica status solidi. A. Applied research. 1984, Vol 86, Num 1, pp K11-K14, issn 0031-8965Article

MICROSTRUCTURAL CHARACTERIZATION OF CONVENTIONALLY AND PLASMA-SINTERED Fe-NbC AND Fe-TaC COMPOSITESNELMO KLEIN, Aloisio; MARTINELLI, Antonio Eduardo; MARIBONDO NASCIMENTO, Rubens et al.International journal of powder metallurgy (1986). 2011, Vol 47, Num 6, pp 29-37, issn 0888-7462, 9 p.Article

Effect of NbC and TiC precipitation on shape memory in an iron-based alloySTANFORD, N; DUNNE, D. P.Journal of materials science. 2006, Vol 41, Num 15, pp 4883-4891, issn 0022-2461, 9 p.Article

Compression behavior of NbC under nonhydrostatic conditions to 57 GPaLIERMANN, H. P; SINGH, A. K; SOMAYAZULU, M et al.International journal of refractory metals & hard materials. 2007, Vol 25, Num 5-6, pp 386-391, issn 0958-0611, 6 p.Article

Dissolution of Nb(C,N) in mild steel during annealingHASHIMOTO, Y; SHINOHARA, K.Steel research. 1992, Vol 63, Num 5, pp 219-220, issn 0177-4832Article

Characterization of NbC coatings deposited by magnetron sputtering methodZOITA, C. N; BRAIC, L; KISS, A et al.Surface & coatings technology. 2010, Vol 204, Num 12-13, pp 2002-2005, issn 0257-8972, 4 p.Conference Paper

Grain Growth Simulations Including Particle Pinning Using the Multiphase-field ConceptAPEL, Markus; BÖTTGER, Bernd; RUDNIZKI, Jenny et al.ISIJ international. 2009, Vol 49, Num 7, pp 1024-1029, issn 0915-1559, 6 p.Article

Corrosion resistance of niobium carbide coatings produced on AISI 1045 steel via thermo-reactive diffusion depositionORJUELAG, Alejandro; RINCON, Rosa; JAIRO OLAYA, John et al.Surface & coatings technology. 2014, Vol 259, pp 667-675, issn 0257-8972, 9 p., cArticle

Modelling the precipitation of NbC on dislocations in α-FePERRARD, F; DESCHARNPS, A; MAUGIS, P et al.Acta materialia. 2007, Vol 55, Num 4, pp 1255-1266, issn 1359-6454, 12 p.Article

High-temperature oxidation of NbC and TaC at low oxygen pressures = Oxydation à température élevée de NbC et TaC sous de faibles pressions d'oxygène = Hochtemperatur-Oxidation von NbC und TaC bei niedrigen SauerstoffdrueckenSZOEKEFALVI-NAGY, A; JEHN, H.Zeitschrift für Metallkunde. 1984, Vol 75, Num 5, pp 389-394, issn 0044-3093Article

Alliage des aciers à carbone avec du niobiumLOSKUTOV, V. F; BOBINA, M. N.Izvestija vysših učebnyh Zavedenij. Černaja Metallurgija. 1983, Num 5, issn 0368-0797, 154Article

The influence of Nb and Mo on the microstructure and mechanical properties of Ni―Cr―Fe GTAW weldsJENG, Sheng-Long; CHANG, Yun-Han.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2012, Vol 555, pp 1-12, issn 0921-5093, 12 p.Article

Grain and phase boundary segregation in WC―Co with TiC, ZrC, NbC or TaC additionsWEIDOW, Jonathan; ANDREN, Hans-Olof.International journal of refractory metals & hard materials. 2011, Vol 29, Num 1, pp 38-43, issn 0958-0611, 6 p.Article

Y₂O₃- and NbC-doped ultrafine WC-10Co alloys by low pressure sinteringXIAO, D. H; HE, Y. H; SONG, M et al.International journal of refractory metals & hard materials. 2010, Vol 28, Num 3, pp 407-411, issn 0958-0611, 5 p.Article

Development of cold work tool steel based-MMC coating using HVOF spraying and its HIP densification behaviourRAJASEKARAN, B; MAUER, G; VASSEN, R et al.Surface & coatings technology. 2010, Vol 204, Num 23, pp 3858-3863, issn 0257-8972, 6 p.Article

Synthesis of copper-niobium carbide composite powder by in situ processingHUSSAIN, Zuhailawati; OTHMAN, Radzali; BUI DUC LONG et al.Journal of alloys and compounds. 2008, Vol 464, Num 1-2, pp 185-189, issn 0925-8388, 5 p.Article

VC-doped WC-NbC-Co hardmetalsHUANG, S. G; VAN DER BIEST, O; VLEUGELS, J et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 488, Num 1-2, pp 420-427, issn 0921-5093, 8 p.Article

Nb-alloyed Cr-steel in simulated strip casting processSCHELLER, Piotr R; LACHMANN, Stefan; KLINKENBERG, Christian et al.ISIJ international. 2006, Vol 46, Num 12, pp 1865-1870, issn 0915-1559, 6 p.Conference Paper