Pascal and Francis Bibliographic Databases

Help

Search results

Your search

au.\*:("POZA, P")

Publication Year[py]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Discipline (document) [di]

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Language

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Author Country

A-Z Z-A Frequency ↓ Frequency ↑
Export in CSV

Results 1 to 25 of 41

  • Page / 2
Export

Selection :

  • and

Fracture toughness of Al/SiC composites in the temperature range -136°C to 190°CLLORCA, J; POZA, P.Scripta metallurgica et materialia. 1993, Vol 29, Num 2, pp 261-266, issn 0956-716XArticle

Microstructure evolution of vacuum plasma sprayed CoNiCrAlY coatings after heat treatment and isothermal oxidationPOZA, P; GRANT, P. S.Surface & coatings technology. 2006, Vol 201, Num 6, pp 2887-2896, issn 0257-8972, 10 p.Article

Mechanical behavior of Al-Li-SiC composites : Part I. Microstructure and tensile deformationPOZA, P; LLORCA, J.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1999, Vol 30, Num 3A, pp 845-855, issn 1073-5623Article

Mechanical behavior of Al-Li/SiC composites : Part II. Cyclic deformationPOZA, P; LLORCA, J.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1999, Vol 30, Num 3A, pp 857-867, issn 1073-5623Article

Mechanical behavior of Al-Li/SiC composites : Part III. Micromechanical modelingPOZA, P; LLORCA, J.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1999, Vol 30, Num 3A, pp 869-878, issn 1073-5623Article

Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperaturesPOZA, P; LLORCA, J.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1996, Vol 206, Num 2, pp 183-193, issn 0921-5093Article

Influence of reinforcement fracture on the cyclic stress-strain curve of metal-matrix compositesLLORCA, J; POZA, P.Acta metallurgica et materialia. 1995, Vol 43, Num 11, pp 3959-3969, issn 0956-7151Article

A study of the failure mechanisms in Al/Al2O3 and Al/SiC composites through quantitative microscopyPOZA, P; LLORCA, J.Journal of materials science. 1995, Vol 30, Num 23, pp 6075-6082, issn 0022-2461Article

Influence of matrix strength on reinforcement fracture and ductility in Al-Al2O3 compositesLLORCA, J; POZA, P.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1994, Vol 185, Num 1-2, pp 25-37, issn 0921-5093Article

Temperature and velocity transitions in dry sliding wear of Al―Li/SiC compositesGOMEZ-DEL RIO, T; RICO, A; GARRIDO, M. A et al.Wear. 2010, Vol 268, Num 5-6, pp 700-707, issn 0043-1648, 8 p.Article

Mechanical properties of thermal barrier coatings after isothermal oxidation. Depth sensing indentation analysisRICO, A; GOMEZ-GARCIA, J; MUNEZ, Cj et al.Surface & coatings technology. 2009, Vol 203, Num 16, pp 2307-2314, issn 0257-8972, 8 p.Article

Modificación superficial con láser de diodo de alta energía (HPDL) de barreras térmicas de CaZrO3 depositadas por proyección térmica = Surface modification by high power diode laser (HPDL) of CaZrO3 thermal sprayed barrier coatingsMUNEZ, C. J; GOMEZ-GARCIA, J; SALAZAR, A et al.Boletín de la Sociedad Española de Cerámica y Vidrio. 2007, Vol 46, Num 4, pp 184-190, issn 0366-3175, 7 p.Article

Influence of single-walled carbon nanotubes on the effective elastic constants of poly(ethylene terephthalate)GOMEZ-DEL RIO, T; POZA, P; RODRIGUEZ, J et al.Composites science and technology. 2010, Vol 70, Num 2, pp 284-290, issn 0266-3538, 7 p.Article

Degradación de recubrimientos ZrO2-CaO/NiAlMo por oxidación isoterma = Degradation of thermal barrier coatings ZrO2-CaO/NiAlMo by isothermal oxidationSALAZAR, A; COMEZ-GARCIA, J; POZA, P et al.Boletín de la Sociedad Española de Cerámica y Vidrio. 2006, Vol 45, Num 6, pp 389-395, issn 0366-3175, 7 p.Article

Identification of σ and Ω phases in AA2009/SiC compositesRODRIGO, P; POZA, P; UTRILLA, M. V et al.Journal of alloys and compounds. 2009, Vol 482, Num 1-2, pp 187-195, issn 0925-8388, 9 p.Article

Transmission electron microscopy study on silicon nitride/stainless steel bonded interfacesPOZA, P; MIRANZO, P; OSENDI, M. I et al.Thin solid films. 2008, Vol 517, Num 2, pp 779-781, issn 0040-6090, 3 p.Article

Dry sliding wear behaviour of aluminium-lithium alloys reinforced with SiC particlesRODRIGUEZ, J; POZA, P; GARRIDO, M. A et al.Wear. 2007, Vol 262, Num 3-4, pp 292-300, issn 0043-1648, 9 p.Article

Micromechanical characterization of Al 8090/SiC composites by nanoindentationGOMEZ-DEL RIO, T; POZA, P; RODRIGUEZ, J et al.Journal of materials science. 2005, Vol 40, Num 6, pp 1513-1515, issn 0022-2461, 3 p.Article

Superconductores de alta temperatura crítica Bi2Sr2CaCu2O8+δ altamente texturados : propiedades mecánicas = Textured Bi2Sr2CaCu2O8+δ high temperature superconductors : mechanical propertiesPASTOR, J. Y; POZA, P; LLORCA, J et al.Boletín de la Sociedad Española de Cerámica y Vidrio. 2000, Vol 39, Num 6, pp 725-728, issn 0366-3175Conference Paper

Effect of reinforcement geometry on precipitation kinetics of powder metallurgy AA2009/SiC compositesRODRIGO, P; POZA, P; UTRILLA, V et al.Journal of alloys and compounds. 2009, Vol 479, Num 1-2, pp 451-456, issn 0925-8388, 6 p.Article

Mechanical properties of textured Bi2Sr2CaCu2O8+δ high-temperature superconductorsPASTOR, J. Y; POZA, P; LLORCA, J et al.Journal of the American Ceramic Society. 1999, Vol 82, Num 11, pp 3139-3144, issn 0002-7820Article

Crecimiento y caracterización de recubrimientos ceràmicos con aplicaciones como barreras térmicas = Processing and characterization of ceramic coatings for thermal barrier applicationsGOMEZ-GARCIA, J; POZA, P; UTRILLA, V et al.Boletín de la Sociedad Española de Cerámica y Vidrio. 2006, Vol 45, Num 2, pp 70-74, issn 0366-3175, 5 p.Article

The effect of strain rate on the tensile deformation of Ti-6Al-4V/SiC compositesGALVEZ, F; GONZALEZ, C; POZA, P et al.Scripta materialia. 2001, Vol 44, Num 11, pp 2667-2671, issn 1359-6462Article

Mechanical properties of Inconel 625 laser cladded coatings: Depth sensing indentation analysisVERDI, D; GARRIDO, M. A; MUNEZ, C. J et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 598, pp 15-21, issn 0921-5093, 7 p.Article

Mechanical properties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysisPOZA, P; MUNEZ, C. J; GARRIDO-MANEIRO, M. A et al.Surface & coatings technology. 2014, Vol 243, pp 51-57, issn 0257-8972, 7 p.Conference Paper

  • Page / 2