Preparation and characterization of superhydrophobic silica-based surfaces by using polypropylene glycol and tetraethoxysilane precursorsCHANG, Kuei-Chien; CHEN, Yu-Kai; HUI CHEN et al.Surface & coatings technology. 2007, Vol 201, Num 24, pp 9579-9586, issn 0257-8972, 8 p.Article

Transition of water adhesion on superhydrophobic surface during aging of polypropylene modified by oxygen capacitively coupled radio frequency plasmaLI, Y. P; SHI, W; LI, S. Y et al.Surface & coatings technology. 2012, Vol 213, pp 139-144, issn 0257-8972, 6 p.Article

Polypropylene surface modification by entrapment of polypropylene-graft-poly(butyl methacrylate)CHEN, H. J; SHI, X. H; ZHU, Y. F et al.Applied surface science. 2008, Vol 254, Num 8, pp 2521-2527, issn 0169-4332, 7 p.Article

Fabrication of highly transparent and superhydrophobic silica-based surface by TEOS/PPG hybrid with adjustment of the pH valueCHANG, Kuei-Chien; CHEN, Yu-Kai; HUI CHEN et al.Surface & coatings technology. 2008, Vol 202, Num 16, pp 3822-3831, issn 0257-8972, 10 p.Article

Splat formation of polypropylene flame sprayed onto a flat surfaceALAMARA, Kadhim; SABER-SAMANDARI, Saeed; BERNDT, Christopher C et al.Surface & coatings technology. 2010, Vol 205, Num 7, pp 2518-2524, issn 0257-8972, 7 p.Article

Wettability of polypropylene films coated with SiO_x plasma deposited layersBELIEF, A; SAHLI, S; ZIARI, Z et al.Surface & coatings technology. 2006, Vol 201, Num 1-2, pp 129-135, issn 0257-8972, 7 p.Article

Study of crystallization and melting behavior of polypropylene-block-polyethylenes copolymers fractionated from polypropylene and polyethylene mixturesXU, Jun-Ting; DING, Ping-Jing; FU, Zhi-Sheng et al.Polymer international. 2004, Vol 53, Num 9, pp 1314-1320, issn 0959-8103, 7 p.Article

Preparation, structures and properties of shell/polypropylene biocompositesZHIDAN LIN; ZIXIAN GUAN; CHAO CHEN et al.Thermochimica acta. 2013, Vol 551, pp 149-154, issn 0040-6031, 6 p.Article

Fabrication of PP-g-PEGMA-g-heparin and its hemocompatibility: From protein adsorption to anticoagulant tendencyJING JIN; WEI JIANG; QIANG SHI et al.Applied surface science. 2012, Vol 258, Num 15, pp 5841-5849, issn 0169-4332, 9 p.Article

Comparison of biomaterials in the early postoperative period: Polypropylene meshes in laparoscopic inguinal hernia repairLANGENBACH, M. R; SCHMIDT, J; ZIRNGIBL, H et al.Surgical endoscopy. 2003, Vol 17, Num 7, pp 1105-1109, issn 0930-2794, 5 p.Article

Conferring durable antimicrobial properties on nonwoven polypropylene via plasma-assisted graft polymerization of DADMACMAZLOUMPOUR, Maryam; MALSHE, Priya; EL-SHAFEI, Ahmed et al.Surface & coatings technology. 2013, Vol 224, pp 1-7, issn 0257-8972, 7 p.Article

Thermal stability and flammability of polypropylene/montmorillonite compositesHUAILI QIN; SHIMIN ZHANG; CHUNGUI ZHAO et al.Polymer degradation and stability. 2004, Vol 85, Num 2, pp 807-813, issn 0141-3910, 7 p.Article

The effect of thermal history of polyamide 6 on the crystallization and melting behavior of β-nucleated polypropylene/polyamide 6 blendsZHIDAN LIN; ZIXIAN GUAN; ZISHOU ZHANG et al.Thermochimica acta. 2012, Vol 543, pp 59-65, issn 0040-6031, 7 p.Article

The manufacturing of polyamide- and polypropylene-organoclay nanocomposite filaments and their suitability for textile applicationsONDER, Emel; SARIER, Nihal; SABRI ERSOY, M et al.Thermochimica acta. 2012, Vol 543, pp 37-58, issn 0040-6031, 22 p.Article

Effect of photo-oxidation cracks on behaviour of thick polypropylene samplesYAKIMETS, Iryna; DAWEI LAI; GUIGON, Michèle et al.Polymer degradation and stability. 2004, Vol 86, Num 1, pp 59-67, issn 0141-3910, 9 p.Article

The effect of some thiosemicarbazide compounds on thermal oxidation of polypropyleneSETNESCU, Radu; BARCUTEAN, Corina; JIPA, Silviu et al.Polymer degradation and stability. 2004, Vol 85, Num 3, pp 997-1001, issn 0141-3910, 5 p.Conference Paper

3D refractive index profile for the characterization of necking phenomenon along stretched polypropylene fibresHAMZA, A. A; SOKKAR, T. Z. N; EL-MORSY, M. A et al.Optics communications. 2010, Vol 283, Num 9, pp 1684-1689, issn 0030-4018, 6 p.Article

Surface characteristics of polypropylene film treated by an atmospheric pressure plasmaKWON, Oh-June; SHEN TANG; MYUNG, Sung-Woon et al.Surface & coatings technology. 2005, Vol 192, Num 1, pp 1-10, issn 0257-8972, 10 p.Article

Evaluation of the interfacial bonding between fibrous substrate and sputter coated copperQUFU WEI; QIUXIANG XU; YIBING CAI et al.Surface & coatings technology. 2008, Vol 202, Num 19, pp 4673-4680, issn 0257-8972, 8 p.Article

Study of polypropylene surface modification by air dielectric barrier discharge operated at two different frequenciesKOSTOV, K. G; NISHIME, T. M. C; HEIN, L. R. O et al.Surface & coatings technology. 2013, Vol 234, pp 60-66, issn 0257-8972, 7 p.Article

Characterization of nonwoven material functionalized by sputter coating of copperQUFU WEI; XUELIANG XIAO; DAYIN HOU et al.Surface & coatings technology. 2008, Vol 202, Num 12, pp 2535-2539, issn 0257-8972, 5 p.Article

Polypropylene surface modification model in atmospheric pressure dielectric barrier dischargeCHANGQUAN WANG; XIANGNING HE.Surface & coatings technology. 2006, Vol 201, Num 6, pp 3377-3384, issn 0257-8972, 8 p.Article

The analysis of infection after polypropylene mesh repair of abdominal wall hernia. CommentaryJEZUPORS, Arnolds; MIHELSONS, Maris; SAADIA, Roger et al.World journal of surgery. 2006, Vol 30, Num 12, pp 2270-2278, issn 0364-2313, 9 p.Article

Intraperitoneal polypropylene mesh hernia repair complicates subsequent abdominal surgery. CommentaryHALM, J. A; DE WALL, L. L; STEYERBERG, E. W et al.World journal of surgery. 2007, Vol 31, Num 2, pp 423-430, issn 0364-2313, 8 p.Article

Plasma-modified polypropylene membranes as separators in high-power alkaline batteriesCISZEWSKI, Aleksander; GANCARZ, Irena; KUNICKI, Jerzy et al.Surface & coatings technology. 2006, Vol 201, Num 6, pp 3676-3684, issn 0257-8972, 9 p.Article