Cyclic pull-out test of single PVA fibers in cementitious matrixLEE, Seong-Cheol; SHIN, Kyung-Joon; OH, Byung-Hwan et al.Journal of composite materials. 2011, Vol 45, Num 26, pp 2765-2772, issn 0021-9983, 8 p.Article

Factors influencing pull-off tests on concrete = Paramètres de mesure influençant les résultats des tests d'arrachement de béton en surfaceBUNGEY, J.H; MADANDOUST, R.Magazine of Concrete Research. 1992, Vol 44, Num 158, pp 21-30, issn 0024-9831Article

Modification of epoxy resin by polysulfone to improve the interfacial and mechanical properties in glass fibre composites. II. Adhesion of the epoxy-polysulfone matrices to glass fibresV.BRANTSEVA, T; GORBATKINA, Yu. A; MÄDER, E et al.Journal of adhesion science and technology. 2004, Vol 18, Num 11, pp 1293-1308, issn 0169-4243, 16 p.Article

Biology of alkali- and heat-treated titanium implantsNISHIGUCHI, Shigeru; FUJIBAYASHI, Shunsuke; KIM, Hyun-Min et al.Journal of biomedical materials research. 2003, Vol 67A, Num 1, pp 26-35, issn 0021-9304, 10 p.Article

Acoustic emission and bond degradation in reinforced concrete due to elevated temperatures = Emission acoustique et dégradation de l'adhérence dans le béton armé sous l'effet de températures élevéesROYLES, R; MORLEY, P. O.Matériaux et constructions. 1984, Num 99, pp 185-191, issn 0025-5432Article

Advances in pull-out testing and data analysisDESARMOT, G; FAVRE, J.-P.Composites science and technology. 1991, Vol 42, Num 1-3, pp 151-187, issn 0266-3538Article

The glass fibre/cement bondLAWS, V; LANGLEY, A. A; WEST, J. M et al.Journal of materials science. 1986, Vol 21, Num 1, pp 289-296, issn 0022-2461Article

Einfluss der Probeköpperform und der Messpunktanordnung auf die Ergebnisse von Ausziehversuchen = Influence de la forme des spécimens et du choix des points de mesure sur les résultats d'essais d'extraction = Influence of the shape of the pull-out specimen and of the arrangement of the slip measurement on the results of pull-out testsSCHMIDT-THRÖ, G; STÖCKL, S; KUPFER, H et al.Deutscher Ausschuss für Stahlbeton. 1986, Num 378, pp 111-174, issn 0171-7197Article

Model tests for pullout resistance of vertical anchors in clay = Essai sur modèle de la résistance à l'arrachement d'ancres verticales dans l'argileDAS, B. M; TARQUIN, A. J; MORENO, R et al.Civil engineering for practicing and design engineers. 1985, Vol 4, Num 2, pp 191-209, issn 0277-3775Article

Bond characteristics of oil saturated concrete = Caractéristiques d'adhérence du béton saturé de pétroleFAIYADH, F. I.International journal of cement composites and lightweight concrete. 1985, Vol 7, Num 2, pp 115-131, issn 0262-5075Article

An advanced equipment for single-fibre pull-out test designed to monitor the fracture processHAMPE, A; KALINKA, G; MERETZ, S et al.Composites. 1995, Vol 26, Num 1, pp 40-46, issn 0010-4361Article

Analysis of concrete cores from a cathodically protected bridge deck = Analyse de structures en béton d'un tablier de pont sous protection cathodiqueVIRMANI, Y. P; JONES, W. R.Public roads. 1988, Vol 51, Num 4, pp 123-127, issn 0033-3735Article

Pullout testing of concrete: historical background and scientific level today = Essai d'extraction pour le béton: historique et niveau actuel des connaissancesKRENCHEL, H; BICKLEY, J. A.Nordic concrete research. 1987, Num 6, pp 155-168, issn 0800-6377Article

Trinity square: commentary on concrete test data = Trinity square: commentaire sur des données d'essais du bétonBICKLEY, J. A.Cement, concrete and aggregates. 1984, Vol 6, Num 1, pp 28-32, issn 0149-6123Article

Influence of fiber morphology in pull-out process of chain-shaped fiber reinforced polymer compositesXIAOLONG LU; YI ZHANG; JIARUI XU et al.Scripta materialia. 2006, Vol 54, Num 9, pp 1617-1621, issn 1359-6462, 5 p.Article

Numerical studies on rockbolts mechanism using 2D discontinuous deformation analysisNIE, W; ZHAO, Z. Y; NING, Y. J et al.Tunnelling and underground space technology. 2014, Vol 41, pp 223-233, issn 0886-7798, 11 p.Article

Failure behaviour of foam-based sandwich joints under pull-out testingNGUYEN, Khanh-Hung; PARK, Yong-Bin; KWEON, Jin-Hwe et al.Composite structures. 2012, Vol 94, Num 2, pp 617-624, issn 0263-8223, 8 p.Article

Experimental investigations on bond behaviour of reinforced concrete under transverse tension and repeated loadingLINDORF, A; LEMNITZER, L; CURBACH, M et al.Engineering structures. 2009, Vol 31, Num 7, pp 1469-1476, issn 0141-0296, 8 p.Article

Local bond-slip behavior between cold-formed metal and concreteMAJDI, Yazdan; THOMAS HSU, Cheng-Tzu; PUNURAI, Sun et al.Engineering structures. 2014, Vol 69, pp 271-284, issn 0141-0296, 14 p.Article

Micro assembly injection mouldingMICHAELI, W; OPFERMANN, D.Microsystem technologies. 2006, Vol 12, Num 7, pp 616-619, issn 0946-7076, 4 p.Conference Paper

Experimental behaviour of a novel anchored blind-bolt in tensionPITRAKKOS, Theodoros; TIZANI, Walid.Engineering structures. 2013, Vol 49, pp 905-919, issn 0141-0296, 15 p.Article

Assessment of the bolt-grout interface behaviour of fully grouted rockbolts from laboratory experiments under axial loadsBLANCO MARTIN, Laura; TIJANI, Michel; HADJ-HASSEN, Faouzi et al.International journal of rock mechanics and mining sciences (1997). 2013, Vol 63, pp 50-61, issn 1365-1609, 12 p.Article

Pullout forces and friction in multiwall carbon nanotubesXIA, Z; CURTIN, W. A.Physical review B. Condensed matter and materials physics. 2004, Vol 69, Num 23, pp 233408.1-233408.4, issn 1098-0121Article

Bewehrungsanschlüsse mit nachträglich eingemörtelten Bewehrungsstäben = Reinforcemet connections wits post-installed, bonded rebars = Liaison d'armatures par armatures scellées en un deuxième tempsSPIETH, H.A; ELIGEHAUSEN, R.Beton- und Stahlbetonbau. 2002, Vol 97, Num 9, pp 445-459, issn 0005-9900Article

Ansatz fuer eine vereinfachte Auwertung von Faser-Ausziehversuchen = Simplified evaluation of pull-out bests for fibers = Evaluation simplifiée d'essais d'arrachement pour fibresBRAMESHUBER, W; BANHOLZER, B; BRUEMMER, G et al.Beton- und Stahlbetonbau. 2000, Vol 95, Num 12, pp 702-706, issn 0005-9900Article