Wear behaviour of HVOF thermally sprayed WC-14Co-3Cr coatingsSTAIA, M. H; CARRASQUERO, E.Surface engineering. 2000, Vol 16, Num 6, pp 515-518, issn 0267-0844Article

On the mechanical behavior of commercial-purity aluminum deformed under axisymmetric compression conditionsPUCHI, E. S; STAIA, M. H; VILLALOBOS, C et al.International journal of plasticity. 1997, Vol 13, Num 8-9, pp 723-742, issn 0749-6419Article

Effects of HVOF parameters on adhesion and microstructure of thermal sprayed NiWCrBSi coatingsGIL, L. E; STAIA, M. H.Surface engineering. 2002, Vol 18, Num 4, pp 309-315, issn 0267-0844, 7 p.Article

Effect of post-heat treatment on the corrosion resistance of NiWCrBSi HVOF coatings in chloride solutionGIL, L; PRATO, M. A; STAIA, M. H et al.Journal of thermal spray technology. 2002, Vol 11, Num 1, pp 95-99, issn 1059-9630Article

Efecto del tratamiento térmico posterior sobre la resistencia al desgaste por deslizamiento de un recubrimiento base níquel depositado por HVOF = Effect of the post heat treatment on the sliding wear resistance of a nickel base coating deposited by high velocity oxy-fuel (HVOF)CADENAS, P; RODRIGUEZ, M; STAIA, M. H et al.Revista de metalurgia (Madrid). 2007, Vol 43, Num 1, pp 50-62, issn 0034-8570, 13 p.Article

High-temperature deformation of commercial-purity aluminumPUCHI, E. S; STAIA, M. H.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1998, Vol 29, Num 9, pp 2345-2359, issn 1073-5623Conference Paper

Mechanical behavior of aluminum deformed under hot-working conditionsPUCHI, E. S; STAIA, M. H.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1995, Vol 26, Num 11, pp 2895-2910, issn 1073-5623Article

Fatigue behaviour of 7o75-T6 aluminium alloy coated with WC-12Co alloy deposited by plasma sprayPUCHI-CABRERA, E. S; MACCIO, R; STAIA, M. H et al.Surface engineering. 2006, Vol 22, Num 4, pp 253-262, issn 0267-0844, 10 p.Article

Dry sliding wear of TiN_x PVD coating on 7075-T6 aluminium alloySTAIA, M. H; SANTANA, Y. Y; MARCANO, Z. Del V et al.Surface engineering. 2004, Vol 20, Num 2, pp 128-134, issn 0267-0844, 7 p.Article

Evaluation of microstructure and mechanical properties of nitrided steelsHERNANDEZ, M; STAIA, M. H; PUCHI-CABRERA, E. S et al.Surface & coatings technology. 2008, Vol 202, Num 10, pp 1935-1943, issn 0257-8972, 9 p.Article

Sliding wear of a-C:H coatings against alumina in corrosive mediaSTAIA, M. H; PUCHI-CABRERA, E. S; IOST, A et al.Diamond and related materials. 2013, Vol 38, pp 139-147, issn 0925-9635, 9 p.Article

Fatigue behavior of a structural steel coated with a WC―10Co―4Cr/Colmonoy 88 deposit by HVOF thermal sprayingLA BARBERA-SOSA, J. G; SANTANA, Y. Y; VILLALOBOS-GUTIERREZ, C et al.Surface & coatings technology. 2013, Vol 220, pp 248-256, issn 0257-8972, 9 p.Conference Paper

Elastic modulus of TiHfCN thin films by instrumented indentationCHICOT, D; PUCHI-CABRERA, E. S; AUMAITRE, R et al.Thin solid films. 2012, Vol 522, pp 304-313, issn 0040-6090, 10 p.Article

Diamond-like carbon film deposited on nitrided 316L stainless steel substrate: A hardness depth-profile modelingCHICOT, D; PUCHI-CABRERA, E. S; DECOOPMAN, X et al.Diamond and related materials. 2011, Vol 20, Num 10, pp 1344-1352, issn 0925-9635, 9 p.Article

Thin film hardness determination using indentation loading curve modellingCHICOT, D; GIL, L; SILVA, K et al.Thin solid films. 2010, Vol 518, Num 19, pp 5565-5571, issn 0040-6090, 7 p.Article

Ion nitrided AISI H13 tool steel. Part I - Microstructural aspectsCRUZ, M. R; NACHEZ, L; GOMEZ, B. J et al.Surface engineering. 2006, Vol 22, Num 5, pp 359-366, issn 0267-0844, 8 p.Article

Part II: tribological performance of Cr₃C₂-25% NiCr reactive plasma sprayed coatings deposited at different pressuresSTAIA, M. H; VALENTE, T; BARTULI, C et al.Surface & coatings technology. 2001, Vol 146-47, pp 563-570, issn 0257-8972Conference Paper

Characterization and wear behavior of pulsed electrode surfacing coatingsSTAIA, M. H; FRAGIEL, A; CRUZ, M et al.Wear. 2001, Vol 250/51, pp 1051-1060, issn 0043-1648, 2Conference Paper

Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC―10Co―4Cr cermet, deposited by HVOF thermal sprayGONZALEZ-HERMOSILLA, W. A; CHICOT, D; LESAGE, J et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 24-25, pp 6551-6561, issn 0921-5093, 11 p.Article

Fatigue behavior of a SAE 1045 steel coated with Colmonoy 88 alloy deposited by HVOF thermal sprayPUCHI-CABRERA, E. S; STAIA, M. H; ORTIZ-MANCILLA, M. J et al.Surface & coatings technology. 2010, Vol 205, Num 4, pp 1119-1126, issn 0257-8972, 8 p.Conference Paper

Influence of micro-blasting on the microstructure and residual stresses of CVD κ-Al₂O₃ coatingsBARBATTI, C; GARCIA, J; PITONAK, R et al.Surface & coatings technology. 2009, Vol 203, Num 24, pp 3708-3717, issn 0257-8972, 10 p.Article

Mechanical properties of hard AlCrN-based coated substratesLE BOURHIS, E; GOUDEAU, P; STAIA, M. H et al.Surface & coatings technology. 2009, Vol 203, Num 19, pp 2961-2968, issn 0257-8972, 8 p.Article

Pulsed electrode deposition of superhard coatings on steel substrates : microstructural and chemical studyCONSTANTINO, M. E; CAMPILLO, B; STAIA, M. H et al.Surface engineering. 2006, Vol 22, Num 3, pp 212-218, issn 0267-0844, 7 p.Article

Effect of substrate roughness induced by grit blasting upon adhesion of WC-17% Co thermal sprayed coatingsSTAIA, M. H; RAMOS, E; CARRASQUERO, A et al.Thin solid films. 2000, Vol 377-78, pp 657-664, issn 0040-6090Conference Paper

Microstructural and tribological characterization of an A-356 aluminum alloy superficially modified by laser alloyingSTAIA, M. H; CRUZ, M; DAHOTRE, Narendra B et al.Thin solid films. 2000, Vol 377-78, pp 665-674, issn 0040-6090Conference Paper