High transition temperature superconducting Pb₈₀Bi₂₀ filament produced by glass-coated melt spinning = Filament supraconducteur Pb₈₀Bi₂₀ à haute température de transition, obtenu par filage sous verreGOTO, T.Transactions of the Japan institute of metals. 1984, Vol 25, Num 5, pp 319-323, issn 0021-4434Article

Formation of amorphous phase in melt-spun and injection-cast Cu₆₀Zr₃₀Ti₁₀ alloysPARK, E. S; CHANG, H. J; KIM, D. H et al.Scripta materialia. 2004, Vol 51, Num 3, pp 221-224, issn 1359-6462, 4 p.Article

Structural imperfections in Pr₂Fe₁₄B magnets with additions of al, Cu and ZnZHANG, Y. J; WITHANAWASAM, L; HADJIPANAYIS, G. C et al.IEEE transactions on magnetics. 1992, Vol 28, Num 5, pp 2133-2135, issn 0018-9464, 2Conference Paper

Rapid solidification for the wire industry = Procédé de solidification rapide pour ĺindustrie du fil métallique = Schnelle Erstarrungstechnik bei der DrahtfertigungFEEST, E.A.Wire industry. 1985, Vol 52, Num 618, pp 371-372, issn 0043-6011Article

Preparation of superconducting lead-alloy long filaments by glass-coated melt spinning = Préparation de longs filaments d'alliage de plomb supraconducteurs par filage à l'état liquide sous verreGOTO, T.Transactions of the Japan institute of metals. 1983, Vol 24, Num 8, pp 595-600, issn 0021-4434Article

Adhesion Upon Solidification and Detachment in the Melt Spinning of MetalsALTIERI, Anthony L; STEEN, Paul H.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2014, Vol 45, Num 6, pp 2262-2268, issn 1073-5615, 7 p.Article

Theoretical analysis of ribbon formation by planar flow castingKUBICAR, L; ADAMISOVA, S.International journal of rapid solidification. 1995, Vol 8, Num 4, pp 281-313, issn 0265-0916Article

Fine metallic and ceramic fibers by melt extractionSTRÖM-OLSEN, J. O; RUDKOWSKA, G; RUDKOWSKI, P et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1994, Vol 179-80, pp 158-162, issn 0921-5093Conference Paper

Factors controlling thickness of amorphous ribbon in single roller processSATO, Y; OZAWA, T; SATO, T et al.Nippon Kinzoku Gakkaishi (1952). 1992, Vol 56, Num 5, pp 553-557, issn 0021-4876Article

Development of trapezoid-shaped Nd-Fe-B die-upset magnets by preform methodIWASAKI, K; SHINODA, M; TANIGAWA, S et al.IEEE transactions on magnetics. 1992, Vol 28, Num 5, pp 2850-2852, issn 0018-9464, 2Conference Paper

Microstructure characterization of Sm-Fe-Zr melt-spun hard magnetic systemsSIMION, B. M; THOMAS, G.IEEE transactions on magnetics. 1992, Vol 28, Num 5, pp 2847-2849, issn 0018-9464, 2Conference Paper

Composition gradients through ribbon thickness of the melt spun amorphous Al₇₀Fe₁₃Si₁₇ alloy = Gradients de composition à travers l'épaisseur de ruban de l'alliage amorphe Al₇₀Fe₁₃Si₁₇ obtenu par filage à l'état liquideLEGRESY, J. M; SAINFORT, P; AUDIER, M et al.Journal de physique. Colloques. 1985, Vol 46, Num 8, pp C8.579-C8.583, issn 0449-1947Article

Tin increases its cost effectivenessEVANS, C.J.Metallurgia (1978). 1984, Vol 51, Num 1, pp 11-12, issn 0141-8602Article

Evolution of order in melt-spun Ni-25at.%V alloysSINGH, J. B; SUNDARARAMAN, M; BANERJEE, S et al.Acta materialia. 2005, Vol 53, Num 4, pp 1135-1152, issn 1359-6454, 18 p.Article

Structure and properties of melt-spun Mg-Pd binary alloysYAMAURA, Shin-Ichi; KIMURA, Hisamichi; INOUE, Akihisa et al.Materials transactions - JIM. 2003, Vol 44, Num 9, pp 1895-1898, issn 0916-1821, 4 p.Article

Structure and periodicity of decagonal quasicrystalline phases = Structure et périodicité des phases quasicristallines décagonalesSURYANARAYANA, C.Scripta metallurgica. 1989, Vol 23, Num 2, pp 189-191, issn 0036-9748Article

Neue und verbesserte metallische Werkstoffe durch sehr rasches Abschrecken fuer die verschiedensten industriellen Anwendungen = Advanced metallic materials by rapid quenching for different industrial applicationsARMBRUSTER, E; SCHLOEGL, R; HAUERT, R et al.Material + technik. 1985, Vol 13, Num 1, pp 92-97, issn 0376-6845Article

Multilayered compact ribbons obtained by centrifuge melt spinning = Rubans compacts à multicouches obtenus par filage à l'état liquide centrifugeROSEN, G; GEFEN, Y; BARAM, J et al.Journal of materials science letters. 1985, Vol 4, Num 10, pp 1258-1260, issn 0261-8028Article

Preparation of ductile high strength Cr and Co base filaments by glass-coated melt spinning = Préparation de filaments ductiles à haute résistance à base de Cr et de Co par filage sous verre à partir de l'état liquideGOTO, T; YOSHINO, A.Transactions of the Japan institute of metals. 1985, Vol 26, Num 8, pp 557-562, issn 0021-4434Article

Ribbon-substrate adhesion dynamics in chill block melt-spinning processes = Dynamique de l'adhérence ruban-substrat dans le processus de filage à l'état liquide sur bloc refroidiLIEBERMANN, H. H.Metallurgical transactions. B, Process metallurgy. 1984, Vol 15, Num 1, pp 155-161, issn 0360-2141Article

Turbulent flow in chill block casting = Ecoulement turbulent au cours de la coulée sur un bloc refroidiZIELINSKI, P. G; AST, D. G.Scripta metallurgica. 1983, Vol 17, Num 3, pp 291-294, issn 0036-9748Article

On the coercive field of the nearly non-magnetostrictive amorphous ferromagnetic alloy Co₅₈Ni₁₀Fe₅Si₁₁B₁₆ = Ueber das Koerzitivfeld der fast nichtmagnetostriktiven, amorphen ferromagnetischen Legierung Co₅₈Ni₁₀Fe₅Si₁₁B₁₆BECK, W; KRONMUELLER, H.Physica status solidi. A. Applied research. 1983, Vol 79, Num 1, pp 109-114, issn 0031-8965Article

Influence of Melt-Spinning Parameters on the Structure and Soft Magnetic Properties of (Fe_0.65Co_0.35)₈₈Zr₇B₄Cu₁ AlloyARVINDHA BABU, D; SRIVASTAVA, A. P; MAJUMDAR, B et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 5, pp 1313-1320, issn 1073-5623, 8 p.Article

Magnetic hardening mechanism of PrCo₅-based ribbons with C addition prepared by melt spinningZHANG, W. Y; YANG, B; STOICA, M et al.International journal of materials research. 2008, Vol 99, Num 1, pp 67-69, issn 1862-5282, 3 p.Article

Capillary puddle vibrations linked to casting-defect formation in planar-flow melt spinningBYRNE, Cormac J; THEISEN, Eric A; REED, Barry L et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2006, Vol 37, Num 3, pp 445-456, issn 1073-5615, 12 p.Article