One shot failure modes in spot welded structuresSALVINI, P; VULLO, V; VIVIO, F et al.Welding international. 2005, Vol 19, Num 4, pp 297-304, issn 0950-7116, 8 p.Article

The effect of anvil geometry and welding energy on microstructures in ultrasonic spot welds of AA6111-T4JAHN, R; COOPER, R; WILKOSZ, D et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2007, Vol 38, Num 3, pp 570-583, issn 1073-5623, 14 p.Article

Electrode Dressing Makes a Better Spot WeldKUSANO, Hiro.Welding journal. 2011, Vol 90, Num 5, pp 28-32, issn 0043-2296, 5 p.Article

Spot Welding of AdvancedLOPEZ-CORTEZ, V. H; REYES-VALDES, F. A.Welding journal. 2008, Vol 87, Num 12, pp 36-40, issn 0043-2296, 5 p.Article

Off-line-Programmierung von Industrierobotern und der Einfluss ihrer Positioniergenauigkeit = Programmation hors ligne, de robots industriels et influence de la précision de positionnement. I = Off-line programming directed to the subject in industrial robot utilization with absolute positioning exactness. IDUELEN, G; BERNHARDT, R; HELD, J et al.Fertigungstechnik und Betrieb. 1986, Vol 36, Num 9, pp 550-553, issn 0015-024XArticle

Making resistance spot welding saferHIRSCH, Roger B.Welding journal. 2007, Vol 86, Num 2, pp 32-37, issn 0043-2296, 6 p.Article

Formation and retention of local melted films in AZ91 friction stir spot weldsSU, Peter; GERLICH, Adrian; YAMAMOTO, Motomichi et al.Journal of materials science. 2007, Vol 42, Num 24, pp 9954-9965, issn 0022-2461, 12 p.Article

Fatigue strength of spot welded joints on Al-Mg alloy sheets for auto bodyMIZUKOSHI, H; NANBA, K; SANO, H et al.Keikinzoku. 1991, Vol 41, Num 10, pp 711-715, issn 0451-5994Article

Spot and Projection Welding BasicsMCDEVITT, Larry H.Welding journal. 2012, Vol 91, Num 9, pp 81-83, issn 0043-2296, 3 p.Article

The Mechanisms of Resistance Spot Welding of Magnesium to SteelLIU, L; XIAO, L; FENG, J. C et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2010, Vol 41, Num 10, pp 2651-2661, issn 1073-5623, 11 p.Article

An analysis of resistance spot weldingZHIGANG HOU; YUANXUN WANG; CHUNZHI LI et al.Welding journal. 2006, Vol 85, Num 3, pp 36-40, issn 0043-2296, 5 p.Article

Robotic welding system with parallel degrees of freedomPOTKONJAK, V; KRSTULOVIC, A.Robotics and computer-integrated manufacturing. 1991, Vol 8, Num 3, pp 171-174, issn 0736-5845Article

Phased Array Testing of Resistance Spot WeldsNA, Jeong K.Welding journal. 2012, Vol 91, Num 9, pp 36-39, issn 0043-2296, 4 p.Article

Cracking in the stir zones of Mg-alloy friction stir spot weldsYAMAMOTO, Motomichi; GERLICH, Adrian; NORTH, Thomas H et al.Journal of materials science. 2007, Vol 42, Num 18, pp 7657-7666, issn 0022-2461, 10 p.Article

Ultrasonic spot welding: A new tool for aluminum joiningHETRICK, Elizabeth; JAHN, Ray; REATHERFORD, Larry et al.Welding journal. 2005, Vol 84, Num 2, pp 26-30, issn 0043-2296, 5 p.Article

Assessment of bond interface in impact spot weldingTURGUTLU, A; AL-HASSANI, S. T. S; AKYURT, M et al.International journal of impact engineering. 1997, Vol 19, Num 9-10, pp 755-767, issn 0734-743XArticle

In-product environmental protection: evaluation of chemical emissions for resin fortified resistance spot welding in the automobile industry. II: Laboratory pyrolysis measurement with a welding chamberLÖRINCI, G; GEBEFÜGI, I; KÖTTING, G et al.Journal of analytical and applied pyrolysis. 1995, Vol 33, pp 91-101, issn 0165-2370Conference Paper

Spot Welding Different Sheet Metal Grades and GaugesBIRO, E; CRETTEUR, L; DUPUY, T et al.Welding journal. 2014, Vol 93, Num 1, pp 38-43, issn 0043-2296, 6 p.Article

Some problems associated with the control of the resistance spot welding processMIKNO, Z.Welding international. 2005, Vol 19, Num 11, pp 845-849, issn 0950-7116, 5 p.Article

Trends in aluminum resistance spot welding for the auto industrySPINELLA, Donald J; BROCKENBROUGH, John R; FRIDY, Joseph M et al.Welding journal. 2005, Vol 84, Num 1, pp 34-40, issn 0043-2296, 7 p.Article

Thermal processes in resistance spot welding titanium alloysMEN'SHIKOV, V. A; REDCHITS, V. V; FROLOV, V. A et al.Welding international. 2004, Vol 18, Num 4, pp 315-319, issn 0950-7116, 5 p.Article

Practice-oriented adaptation of simulated manufacturing tasks to the real workcell environmentROOS, E; BEHRENS, A.Revue internationale de CFAO et d'informatique graphique. 1996, Vol 11, Num 1-2, pp 185-198, issn 1266-0175Conference Paper

Stanznieten contra Punktschweissen = Punching/riveting against spot weldingLIEBRECHT, F.VDI-Z. 1994, Vol 136, Num SEP, pp 60-62, issn 0042-1766, NS3Article

Interfacial analysis of the ex-situ reinforced phase of a laser spot welded Zr-based bulk metallic glass compositeWANG, Huei-Sen; CHEN, Hou-Guang; JANG, Jason Shian-Ching et al.Materials characterization. 2013, Vol 86, pp 242-249, issn 1044-5803, 8 p.Article

Mechanical characterization of spot friction stir welded joints in aluminum alloys by combined experimental/numerical approaches Part II: Macromechanical studiesTHOPPUL, Srinivasa D; GIBSON, Ronald F.Materials characterization. 2009, Vol 60, Num 11, pp 1352-1360, issn 1044-5803, 9 p.Article