Multi-objective optimization of curvilinear fiber shapes for laminated composite plates by using NSGA-IIHONDA, Shinya; IGARASHI, Teruki; NARITA, Yoshihiro et al.Composites. Part B, Engineering. 2013, Vol 45, Num 1, pp 1071-1078, issn 1359-8368, 8 p.Article

Flexural response of spoolable composite tubulars: an integrated experimental and computational assessmentRODRIGUEZ, Douglas E; OCHOA, Ozden O.Composites science and technology. 2004, Vol 64, Num 13-14, pp 2075-2088, issn 0266-3538, 14 p.Article

An alternative solution method for the damped response of laminated Mindlin platesTEMEL, Beytullah; SAHAN, Mehmet Fatih.Composites. Part B, Engineering. 2013, Vol 47, pp 107-117, issn 1359-8368, 11 p.Article

The amazing bi-angle thin-ply NCF : BI-ANGLE NCFTSAI, Stephen W.JEC composites. 2011, Num 68, pp 51-52, issn 1639-965X, 2 p.Article

Pultrusion and Resin Film Infusion (RFI) of bi-angle thin-ply NCF : BI-ANGLE NCFNEACSU, Valentin; FANUCCI, Jerry; BALONIS, Rick et al.JEC composites. 2011, Num 68, pp 59-61, issn 1639-965X, 3 p.Article

Free Vibrations of Antisymmetric Angle-Ply Laminated Thin Square Composite PlatesAYDOGDU, Metin; TIMARCI, Taner.Journal of advanced materials. 2008, Vol 40, Num 2, pp 57-64, issn 1070-9789, 8 p.Article

Effects of Fiber Orientation on Out-of-plane and In-plane Natural Frequencies of Angle-ply Laminated Composite ArchesCEVIK, Mehmet.Journal of reinforced plastics and composites. 2009, Vol 28, Num 1, pp 59-71, issn 0731-6844, 13 p.Article

Large Amplitude Free Vibration Analysis of Composite Plates with Rotationally Restrained Edges using DQMMALEKZADEH, P; VOSOUGHI, A. R.Journal of reinforced plastics and composites. 2008, Vol 27, Num 4, pp 409-430, issn 0731-6844, 22 p.Article

Effect of lamina material properties on dilatation and through-thickness Poisson's ratio of angle-ply laminatesYEH, Hsien-Liang; YEH, Hsien-Yang.Journal of reinforced plastics and composites. 2003, Vol 22, Num 16, pp 1477-1496, issn 0731-6844, 20 p.Article

The onset of delamination at stress-free edges in angle-ply laminates analysis of two criteriaLEGUILLON, D; MARION, G; HARRY, R et al.Composites science and technology. 2001, Vol 61, Num 3, pp 377-382, issn 0266-3538Conference Paper

Reduction of tensile strength in angle-ply composite laminates due to low-velocity impactSCARPONI, C; BRIOTTI, G; BARBONI, R et al.Journal of reinforced plastics and composites. 1999, Vol 18, Num 1, pp 63-85, issn 0731-6844Article

Similitude requirements and scaling laws for flutter prediction of angle-ply composite platesREZAEEPAZHAND, Jalil; YAZDI, Ali A.Composites. Part B, Engineering. 2011, Vol 42, Num 1, pp 51-56, issn 1359-8368, 6 p.Article

Application of a phenomenological viscoplasticity model to the stress relaxation behavior of unidirectional and angle-ply CFRP laminates at high temperatureMASUKO, Y; KAWAI, M.Composites. Part A, Applied science and manufacturing. 2004, Vol 35, Num 7-8, pp 817-826, issn 1359-835X, 10 p.Conference Paper

Elastic-plastic stress analysis on simply supported thermoplastic laminated plates under thermal loads varying linearlyBEKTA, Numan B; SAYMAN, Onur.Journal of reinforced plastics and composites. 2003, Vol 22, Num 2, pp 149-168, issn 0731-6844, 20 p.Article

Damage growth in constrained angle-ply laminates under cyclic loadingWHARMBY, A. W; ELLYIN, F.Composites science and technology. 2002, Vol 62, Num 9, pp 1239-1247, issn 0266-3538Article

Strain based service time estimation for angle-ply laminatesPETERMANN, J; SCHULTE, K.Composites science and technology. 2002, Vol 62, Num 7-8, pp 1043-1050, issn 0266-3538Article

Thermal elastic-plastic stress analysis in simply supported thermoplastic laminated platesBEKTAS, Numan B; SAYMAN, Onur.Journal of reinforced plastics and composites. 2002, Vol 21, Num 7, pp 639-651, issn 0731-6844Article

The influence of transverse moduli on through-thickness hygrothermal expansion coefficients in angle-ply laminatesYEH, Hsien-Liang; YEH, Hsien-Yang.Journal of reinforced plastics and composites. 2002, Vol 21, Num 18, pp 1637-1652, issn 0731-6844, 16 p.Article

Minimization of thermal expansion of symmetric, balanced, angle ply laminates by optimization of fiber path configurationsRANGARAJAN, Aswath; D'MELLO, Royan J; SUNDARARAGHAVAN, Veera et al.Composites science and technology. 2011, Vol 71, Num 8, pp 1105-1109, issn 0266-3538, 5 p.Article

Some observations on the testing methodology of cord-rubber composites : A reviewCAUSA, A. G; BOROWCZAK, M; HUANG, Y.-M et al.Progress in rubber and plastics technology. 1999, Vol 15, Num 4, pp 185-213, issn 0266-7320Article

Dynamic stability of angle-ply laminated cylindrical shells under impact external pressureKASUYA, H; MATSUOKA, K.Zairyo. 1999, Vol 48, Num 12, pp 1367-1372, issn 0514-5163Article

A higher order displacement model for the plate analysisSHIMPI, R. P; ARYA, H; NAIK, N. K et al.Journal of reinforced plastics and composites. 2003, Vol 22, Num 18, pp 1667-1688, issn 0731-6844, 22 p.Article

Design of multistable composites for application in adaptive structuresHUFENBACH, W; GUDE, M; KROLL, L et al.Composites science and technology. 2002, Vol 62, Num 16, pp 2201-2207, issn 0266-3538, 7 p.Article

Fatigue Damage in Composite CylindersERKAL, Serkan; SAYMAN, Onur; BENLI, Semih et al.Polymer composites. 2010, Vol 31, Num 4, pp 707-713, issn 0272-8397, 7 p.Article

Adhesion failure analyses of bonded tubular single lap joints in laminated fibre reinforced plastic compositesDAS, R. R; PRADHAN, B.International journal of adhesion and adhesives. 2010, Vol 30, Num 6, pp 425-438, issn 0143-7496, 14 p.Article