The model of surface roughness inspection by vision system in turningLEE, B. Y; YU, S. F; JUAN, H et al.Mechatronics (Oxford). 2004, Vol 14, Num 1, pp 129-141, issn 0957-4158, 13 p.Article

Prediction of surface topomorphy and roughness in ball-end millingANTONIADIS, A; SAVAKIS, C; BILALIS, N et al.International journal, advanced manufacturing technology. 2003, Vol 21, Num 12, pp 965-971, issn 0268-3768, 7 p.Article

The effect of cutting parameters on workpiece surface roughness in Wire EDMTOSUN, N; COGUN, C; INANE, A et al.Machining science and technology. 2003, Vol 7, Num 2, pp 209-219, issn 1091-0344, 11 p.Article

Analytical surface roughness parameters of a theoretical profile consisting of elliptical arcsJUN QU; SHIH, Albert J.Machining science and technology. 2003, Vol 7, Num 2, pp 281-294, issn 1091-0344, 14 p.Article

A comparison between computational fluid dynamic and Reynolds approaches for simulating transient EHL line contactsALMQVIST, T; ALMQVIST, A; LARSSON, R et al.Tribology international. 2004, Vol 37, Num 1, pp 61-69, issn 0301-679X, 9 p.Article

Method of determination of truncation parameters from measured surface profileNONOGAKI, Minoru; MORIMOTO, Takuya; NAKAHARA, Tsunamitsu et al.Tribology international. 2003, Vol 36, Num 10, pp 745-752, issn 0301-679X, 8 p.Article

Hydrodynamic lubrication of rough slider bearings with couple stress fluidsNADUVINAMANI, N. B; FATHIMA, Syeda Tasneem; HIREMATH, P. S et al.Tribology international. 2003, Vol 36, Num 12, pp 949-959, issn 0301-679X, 11 p.Article

Geometric modeling of the linear motor driven electrical discharge machining (EDM) die-sinking processYONGSHUN ZHAO; XINGQUAN ZHANG; XIANBING LIU et al.International journal of machine tools & manufacture. 2004, Vol 44, Num 1, pp 1-9, issn 0890-6955, 9 p.Article

A simple numerical model of the apparent loss of eddy current conductivity due to surface roughnessKALYANASUNDARAM, Keerthana; NAGY, Peter B.NDT & E international. 2004, Vol 37, Num 1, pp 47-56, issn 0963-8695, 10 p.Article

On-line surface roughness recognition system using artificial neural networks system in turning operationsLEE, Samson S; CHEN, Joseph C.International journal, advanced manufacturing technology. 2003, Vol 22, Num 7-8, pp 498-509, issn 0268-3768, 12 p.Article

Experimental study of surface roughness in slot end milling AL2014-t6WANG, Ming-Yung; CHANG, Hung-Yen.International journal of machine tools & manufacture. 2004, Vol 44, Num 1, pp 51-57, issn 0890-6955, 7 p.Article

Detailed surface roughness characterization of engineering surfaces undergoing tribological testing leading to scuffingSUH, Allison Y; POLYCARPOU, Andreas A; CONRY, Thomas F et al.Wear. 2003, Vol 255, Num 1, pp 556-568, issn 0043-1648, 13 p.Conference Paper

Surface roughness and resistivity of Au film on Si-(111) substrateWU TANG; KEWEI XU; PING WANG et al.Microelectronic engineering. 2003, Vol 66, Num 1-4, pp 445-450, issn 0167-9317, 6 p.Conference Paper

Selection of optimum conditions for maximum material removal rate with surface finish and damage as constraints in SiC grindingANNE VENU GOPAL; VENKATESWARA RAO, P.International journal of machine tools & manufacture. 2003, Vol 43, Num 13, pp 1327-1336, issn 0890-6955, 10 p.Article

Surface roughness influence on the pull-in voltage of microswitches in presence of thermal and quantum vacuum fluctuationsPALASANTZAS, G; DEHOSSON, J. Th. M.Surface science. 2006, Vol 600, Num 7, pp 1450-1455, issn 0039-6028, 6 p.Article

A comparative clinical outcome evaluation of smooth (10-13 year results) versus rough surface finish (5-8 year results) in an otherwise identically designed cemented titanium alloy stemHINRICHS, F; KUHL, M; BOUDRIOT, U et al.Archives of orthopaedic and trauma surgery. 2003, Vol 123, Num 6, pp 268-272, issn 0936-8051, 5 p.Article

Wear of single crystal silicon as a function of surface roughnessGATZEN, H. H; BECK, M.Wear. 2003, Vol 254, Num 9, pp 907-910, issn 0043-1648, 4 p.Conference Paper

Effect of surface characteristics on compressive stress and leakage rate in gasketed flanged jointsARGHAVANI, J; DERENNE, M; MARCHAND, L et al.International journal, advanced manufacturing technology. 2003, Vol 21, Num 10-11, pp 713-732, issn 0268-3768, 20 p.Article

Synthesis surface effects on the stress and deformation of film/substrate systemSHAO, Shan-Shan; XUAN, Fu-Zhen; ZHENGDONG WANG et al.Applied surface science. 2011, Vol 257, Num 23, pp 9915-9920, issn 0169-4332, 6 p.Article

Surface roughness effects on the heat transfer due to turbulent round jet impingement on convex hemispherical surfacesSHARIF, M. A. R; RAMIREZ, N. M.Applied thermal engineering. 2013, Vol 51, Num 1-2, pp 1026-1037, issn 1359-4311, 12 p.Article

The effect of surface waviness on friction between neolite and quarry tilesCHANG, Wen-Ruey; GRÖNQVIST, Raoul; HIRVONEN, Mikko et al.Ergonomics. 2004, Vol 47, Num 8, pp 890-906, issn 0014-0139, 17 p.Article

Ductile or partial ductile mode machining of brittle materialsZHONG, Z. W.International journal, advanced manufacturing technology. 2003, Vol 21, Num 8, pp 579-585, issn 0268-3768, 7 p.Article

Transition from static to kinetic friction of unlubricated or oil lubricated steel/steel, steel/ceramic and ceramic/ceramic pairsHWANG, D.-H; ZUM GAHR, K.-H.Wear. 2003, Vol 255, Num 1, pp 365-375, issn 0043-1648, 11 p.Conference Paper

Influence of microstructure on surface integrity in turning-part I: The influence of the size of the soft phase in a microstructure on surface-roughness formationGRUM, J; KISIN, M.International journal of machine tools & manufacture. 2003, Vol 43, Num 15, pp 1535-1543, issn 0890-6955, 9 p.Article

On the machining characteristics of H13 tool steel in different hardness states in ball end millingJUNZ WANG, J. J; ZHENG, M. Y.International journal, advanced manufacturing technology. 2003, Vol 22, Num 11-12, pp 855-863, issn 0268-3768, 9 p.Article