Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc methodCELIK, Osman Nuri.Applied surface science. 2013, Vol 274, pp 334-340, issn 0169-4332, 7 p.Article

The cytocompatibility investigation of Ti6Al4V modified with a fluorine-contained copolymer thin filmYIJUN LIU; JIA LUO; BINLIU et al.Applied surface science. 2011, Vol 257, Num 15, pp 6429-6434, issn 0169-4332, 6 p.Article

Structure and tribological performance by nitrogen and oxygen plasma based ion implantation on Ti6Al4V alloyXINGGUO FENG; MINGREN SUN; XINXIN MA et al.Applied surface science. 2011, Vol 257, Num 23, pp 9904-9908, issn 0169-4332, 5 p.Article

Failure analysis of two Ti-alloy total hip arthroplasty femoral stems fractured in vivoMAGNISSALIS, E. A; ZINELIS, S; KARACHALIOS, Th et al.Journal of biomedical materials research. 2003, Vol 66B, Num 1, pp 299-305, issn 0021-9304, 7 p.Article

Water repellency of hierarchical superhydrophobic Ti6Al4V surfaces improved by secondary nanostructuresYIZHOU SHEN; HAIJUN TAO; SHANLONG CHEN et al.Applied surface science. 2014, Vol 321, pp 469-474, issn 0169-4332, 6 p.Article

Solar gas nitriding of Ti6Al4V alloyRODRIGUEZ, Gloria P; HERRANZ, Gemma; ROMERO, Ana et al.Applied surface science. 2013, Vol 283, pp 445-452, issn 0169-4332, 8 p.Article

Morphology and performances of the anodic oxide films on Ti6Al4V alloy formed in alkaline-silicate electrolyte with aminopropyl silane addition under low potentialJIALI CHEN; JINWEI WANG; HONGYE YUAN et al.Applied surface science. 2013, Vol 284, pp 900-906, issn 0169-4332, 7 p.Article

Antibacterial and bioactive nanostructured titanium surfaces for bone integrationFERRARIS, S; VENTURELLO, A; MIOLA, M et al.Applied surface science. 2014, Vol 311, pp 279-291, issn 0169-4332, 13 p.Article

Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using hydrogenated Ti₆Al₄V interlayerPENG HE; JUN WANG; TIESONG LIN et al.International journal of hydrogen energy. 2014, Vol 39, Num 4, pp 1882-1887, issn 0360-3199, 6 p.Article

Friction and wear properties of Ti6Al4V/WC-Co in cold atmospheric plasma jetWENJI XU; XIN LIU; JINLONG SONG et al.Applied surface science. 2012, Vol 259, pp 616-623, issn 0169-4332, 8 p.Article

Characteristics and cyto-compatibility of Collagen/Ca-P coatings on Ti6Al4V substrateWANG, Rex C.-C; HSIEH, Ming-Che; YANG, Shih-Ping et al.Surface & coatings technology. 2011, Vol 205, Num 19, pp 4683-4689, issn 0257-8972, 7 p.Article

On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloyLAWRENCE, J; HAO, L; CHEW, H. R et al.Surface & coatings technology. 2006, Vol 200, Num 18-19, pp 5581-5589, issn 0257-8972, 9 p.Article

AUFNAHME VON SPANNUNG-DEHNUNG-HYSTERESEKURVEN WAEHREND EINER WECHSELBEANSPRUCHUNG BEI 20 KHZ = METHOD FOR THE DIRECT RECORDING OF STRESS-STRAIN-HYSTERESIS CURVES OF SPECIMENS SUBJECTED TO CYCLIC LOADING AT 20 KHZHESSLER W; MUELLNER H; WEISS B et al.1982; Z. METALLKD.; ISSN 0044-3093; DEU; DA. 1982-09; VOL. 73; NO 9; PP. 570-575; BIBL. 31 REF.Article

Fatigue property improvements of Ti―6Al―4V by thin film coatings of metallic glass and TiN: a comparison studyLEE, C. M; CHU, J. P; CHANG, W. Z et al.Thin solid films. 2014, Vol 561, pp 33-37, issn 0040-6090, 5 p.Article

Nanocrystalline diamond thin films grown on Ti6Al4V alloyZHANG, C. Z; LI, Y. S; TANG, Y et al.Thin solid films. 2013, Vol 527, pp 59-64, issn 0040-6090, 6 p.Article

Novel lubricated surface of titanium alloy based on porous structure and hydrophilic polymer brushesKUN WANG; DANGSHENG XIONG; YUXIANG NIU et al.Applied surface science. 2014, Vol 317, pp 875-883, issn 0169-4332, 9 p.Article

SOME CURRENT USES FOR METALS IN, ON, AND AROUND YOUR BODY = METALLE FUER DIE IMPLANTMEDIZIN = METAUX POUR IMPLANTS MEDICAUXMCINTYRE RD.1982; MATER. ENG.; USA; DA. 1982-09; VOL. 96; NO 3; PP. 40-47Article

FATIGUE BEHAVIOR OF SIC REINFORCED TI(6AL-4V) AT 650⁰CBHATT RT; GRIMES HH.1982; METALL. TRANS., A; ISSN 0360-2133; USA; DA. 1982-11; VOL. 13A; NO 11; PP. 1933-1938; BIBL. 8 REF.Article

A TEST TO EVALUATE FLOW LOCALIZATION DURING FORGINGMATAYA MC; KRAUSS G.1981; J. APPLIED METALWORKING; USA; DA. 1981-07; VOL. 2; NO 1; PP. 28-37; BIBL. 11 REF.Article

The effect of nitric acid surface treatment on CaP deposition of Ti6Al4V open-cell foams in SBF solutionTURKAN, U; GUDEN, M.Surface & coatings technology. 2010, Vol 205, Num 7, pp 1904-1916, issn 0257-8972, 13 p.Article

Influence of slight microstructural gradients on the surface properties of Ti6Al4V irradiated by UVGALLARDO-MORENO, A. M; MULTIGNER, M; PACHA-OLIVENZA, M. A et al.Applied surface science. 2009, Vol 255, Num 22, pp 9105-9111, issn 0169-4332, 7 p.Article

Study on bacteria adherence properties of Mo surface-modified layer in Ti₆Al₄V alloy prepared by plasma surface alloying techniqueFAN AILAN; QIN LIN; TIAN LINHAI et al.Applied surface science. 2008, Vol 255, Num 2, pp 419-421, issn 0169-4332, 3 p.Conference Paper

Ti6Al4V coating for carbon/carbon composites synthesized by magnetron sputtering: microstructure and in-vitro biotestsZHANG, Lei-Lei; LI, He-Jun; LU, Jin-Hua et al.Surface and interface analysis. 2013, Vol 45, Num 6, pp 973-977, issn 0142-2421, 5 p.Article

Effects of Ti and TiC ceramic powder on laser-cladded Ti―6Al―4V in situ intermetallic compositeOCHONOGOR, O. F; MEACOCK, C; ABDULWAHAB, M et al.Applied surface science. 2012, Vol 263, pp 591-596, issn 0169-4332, 6 p.Article

In situ tensile tests in sem of sputtered CNx films deposited on Ti6Al4V substrate : effect of film thickness and plasma surface pretreatmentVILLECHAISE, P; MILHET, X; ANGLERAUD, B et al.Thin solid films. 2005, Vol 482, Num 1-2, pp 324-329, issn 0040-6090, 6 p.Conference Paper