Härtbarkeit von Stählen unter Gasabschreckung, Teil 1 = Hardening of steels with gas quenching. Part 1OHLAND, J; CLAUSEN, B; HUNKEL, M et al.HTM. Härterei-technische Mitteilungen. 2001, Vol 56, Num 6, pp 379-385, issn 0341-101XArticle

Réflexions sur un système de refroidissement bi-phase : Trempe = On a dual-phase cooling systemHOFFMANN, R.Traitement thermique (Paris). 2000, Num 327, pp 49-52, issn 0041-0950Article

Improvement of AQC efficiency in the cement processSAGARA, Y; MURATA, M; OHSUMI, M et al.World cement. 1995, Vol 26, Num 3, pp 50-56, issn 0263-6050, 4 p.Article

Electrohydrodynamic quenching in polymer melt electrospinningZHMAYEV, Eduard; CHO, Daehwan; YONG LAK JOO et al.Physics of fluids (1994). 2011, Vol 23, Num 7, issn 1070-6631, 073102.1-073102.8Article

Simulation der Wärmebehandlung von einfachen Bauteilen bei der Abschreckung im Gasdüsenfeld = Heat treatment simulation of geometric simple workpieces during quenching in a nozzle fieldHUNKEL, M; LÜBBEN, Th; BELKESSAM, O et al.HTM. Härterei-technische Mitteilungen. 2001, Vol 56, Num 6, pp 386-393, issn 0341-101XArticle

Surface fictive temperature of annealed and rate-cooled soda-lime glassesTOMOZAWA, M; LEE, Y.-K.Journal of non-crystalline solids. 1999, Vol 253, pp 119-125, issn 0022-3093Article

Le traitement thermique avec chauffage convectif et trempe gazeuse haute pression = Heat treatment with convective heating and high pressure gas quenchingHEILMANN, P.Traitement thermique (Paris). 1995, Num 282, pp 51-59, issn 0041-0950Article

Développement d'un nouveau procédé de trempe à l'eau adapté aux aciers alliés = Development of a new water quench process suitable for alloy steelsROCHETTE, B; CORNEILLER, P; HECHELSKI, R et al.Traitement thermique (Paris). 1995, Num 279, pp 73-76, issn 0041-0950Conference Paper

Microstructure and Charpy impact properties of ferrite-martensite dual phase API X70 linepipe steelSAMI, Zidelmel; TAHAR, Sahraoui; MOHAMED, Hadji et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 598, pp 338-342, issn 0921-5093, 5 p.Article

Effect of cooling rate after controlled forging on properties of low carbon multi-microalloyed steelsEL-BITAR, T; FOUAD, N; ZAKY, A. I et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2012, Vol 534, pp 514-520, issn 0921-5093, 7 p.Article

Simulation of Polyester Melt Spinning with Axial Quench for Increasing ProductivitySUMESH, P. T; MATHUR, T. P; AGARWAL, U. S et al.Journal of applied polymer science (Print). 2010, Vol 116, Num 5, pp 2541-2547, issn 0021-8995, 7 p.Article

Properties of heat-treated aluminium foamsLEHMHUS, Dirk; BANHART, John.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2003, Vol 349, Num 1-2, pp 98-110, issn 0921-5093, 13 p.Article

Niederdruck-Aufkohlung mit Hochdruck-Gasabschreckung: Grundlagen, Einsatzmöglichkeiten und Anlagentechnik = Low pressure carburizing with high pressure gas quenching: Fundamentals, applications and furnace technologyALTENA, H; SCHRANK, E.HTM. Härterei-technische Mitteilungen. 2002, Vol 57, Num 4, pp 247-256, issn 0341-101XArticle

Neue Lösungen für die Aufkohlungstechnologien mit Hochdruckgasabschreckung durch angepasste Stahlmetallurgie = New solutions for the case hardening technologies with high pressure gas quenching through adapted steel metallurgyPICHARD, C; FOREST, D; ROBAT, D et al.HTM. Härterei-technische Mitteilungen. 2002, Vol 57, Num 1, pp 17-22, issn 0341-101XConference Paper

Plasma-carburising : a surface heat treatment process for the new centuryEDENHOFER, B; GRÄFEN, W; MÜLLER-ZILLER, J et al.Surface & coatings technology. 2001, Vol 142-44, pp 225-234, issn 0257-8972Conference Paper

Solidification, quenching gas and magnetic properties in melt-spun Nd₂Fe₁₄BLEWIS, L. H; COLLINS, S. M; KRAMER, M. J et al.IEEE transactions on magnetics. 2001, Vol 37, Num 4, pp 2486-2488, issn 0018-9464, 1Conference Paper

Möglichkeiten und Grenzen der Gasabkühlung = Possibilities and limits of gas-quenchingHOFFMANN, R; STEINMANN, H; USCHKOREIT, D et al.HTM. Härterei-technische Mitteilungen. 1992, Vol 47, Num 2, pp 112-122, issn 0341-101XArticle

Steplike quenching as a method for raising construction tensile strength of steel 42Kh2GSNMMIKHEEV, A.A; VILKOV, V.K; MEL'NIKOVA, N.P et al.Metallovedenie i termičeskaâ obrabotka metallov. 1987, Vol 33, Num 2, pp 9-12, issn 0026-0819Article

High hardness and toughness of white cast iron: The proposal of a novel processXIAOSHUAI JIA; QINGGUO HAO; XUNWEI ZUO et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 618, pp 96-103, issn 0921-5093, 8 p.Article

Microstructure and mechanical properties of titanium aluminide compositions containing FeBETTLES, C. J; TOCHON, S; GIBSON, M. A et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2013, Vol 575, pp 152-159, issn 0921-5093, 8 p.Article

Influence of microstructure changes on corrosion resistance of super duplex stainless steelELHOUD, A. M; RENTON, N. C; LASEBIKAN, D. A et al.International journal of microstructure and materials properties (Print). 2010, Vol 5, Num 1, pp 39-51, issn 1741-8410, 13 p.Article

Air quenching of positronium in mesoporous materials : positron porosimetrySUDARSHAN, K; DUTTA, D; SHARMA, S. K et al.Journal of physics. Condensed matter (Print). 2007, Vol 19, Num 38, issn 0953-8984, 386204.1-386204.8Article

Zukunftspotenzial der Hochdruck-Gasabschreckung beim Ausscheidungshärten von Aluminiumlegierungen. Diskussion = Potential of high pressure gas quenching during age hardening of aluminium alloys. DiscussionKESSLER, O; IRRETIER, A; HOFFMANN, F et al.HTM. Härterei-technische Mitteilungen. 2002, Vol 57, Num 2, pp 116-122, issn 0341-101XConference Paper

Erarbeitung einer Richtlinie zur Wärmeübergangsbestimmung beim Gasabschrecken. Diskussion = Formulation of a guide line for the evaluation of heat transfer coefficient at gas quenching. DiscussionLÜBBEN, Th; LOHRMANN, M; SEGERBERG, S et al.HTM. Härterei-technische Mitteilungen. 2002, Vol 57, Num 2, pp 123-131, issn 0341-101XConference Paper

Low cycle fatigue behavior of an (α + β) titanium alloyNANJUNDASWAMY, G. S; RAMACHANDRA, C; SENGUPTA, P. K et al.Journal of materials science letters. 1998, Vol 17, Num 12, pp 993-997, issn 0261-8028Article