Photo-DSC and dynamic mechanical studies on UV curable compositions containing diacrylate of ricinoleic acid amide derived from castor oilPALANISAMY, Aruna; RAO, B. S.Progress in organic coatings. 2007, Vol 60, Num 3, pp 161-169, issn 0300-9440, 9 p.Article

Three-dimensional stress analysis of cracked satin woven carbon fiber reinforced/polymer composites under tension at cryogenic temperaturesTAKEDA, Tomo; SHINDO, Yasuhide; WATANABE, Shinya et al.Cryogenics (Guildford). 2012, Vol 52, Num 12, pp 784-792, issn 0011-2275, 9 p.Article

Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosetsGUIGO, Nathanael; MIJA, Alice; VINCENT, Luc et al.European polymer journal. 2010, Vol 46, Num 5, pp 1016-1023, issn 0014-3057, 8 p.Article

Damage mechanisms induced by cyclic ply-stresses in carbon-epoxy laminates : Environmental effectsLAFARIE-FRENOT, M. C.International journal of fatigue. 2006, Vol 28, Num 10, pp 1202-1216, issn 0142-1123, 15 p.Conference Paper

Thermo-mechanical behavior of electrospun thermoplastic polyurethane nanofibersALHAZOV, Dmitriy; GRADYS, Arkadiusz; SAJKIEWICZ, Pawel et al.European polymer journal. 2013, Vol 49, Num 12, pp 3851-3856, issn 0014-3057, 6 p.Article

Dough thermo-mechanical properties: influence of sodium chloride, mixing time and equipmentANGIOLONI, A; DALLA ROSA, M.Journal of cereal science (Print). 2005, Vol 41, Num 3, pp 327-331, issn 0733-5210, 5 p.Article

Synthesis, thermal and mechanical properties of modified PMR/carbon fiber compositesSELLADURAI, Madhiyan; SUNDARARAJAN, Pudupadi R; SAROJADEVI, Muthusamy et al.Chemical engineering journal (1996). 2012, Vol 203, pp 333-347, issn 1385-8947, 15 p.Article

Poly(lactic acid) nanocomposites: comparison of their properties with montmorillonite and synthetic mica (II)CHANG, Jin-Hae; YEONG UK AN; CHO, Donghwan et al.Polymer (Guildford). 2003, Vol 44, Num 13, pp 3715-3720, issn 0032-3861, 6 p.Article

Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modelingMÜLLER, Werner W; PRETSCH, Thorsten.European polymer journal. 2010, Vol 46, Num 8, pp 1745-1758, issn 0014-3057, 14 p.Article

Molecular dynamics study on thermo-mechanical properties of bismuth telluride bulkYU TONG; FAJUN YI; LISHENG LIU et al.Computational materials science. 2010, Vol 48, Num 2, pp 343-348, issn 0927-0256, 6 p.Article

Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubesRAHMAN, Muhammad M; HOSUR, Mahesh; LUDWICK, Adriane G et al.Polymer testing. 2012, Vol 31, Num 6, pp 777-784, issn 0142-9418, 8 p.Article

Thermo-mechanical characterization of Cu-Al-Ni shape memory alloys elaborated by powder metallurgyIBARRA, A; SAN JUAN, J; BOCANEGRA, E. H et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2006, Vol 438-40, pp 782-786, issn 0921-5093, 5 p.Conference Paper

From stress sensor towards back end of line embedded thermo-mechanical sensorARRAZAT, B; ORELLANA, S; RIVERO, C et al.Microelectronic engineering. 2014, Vol 120, pp 41-46, issn 0167-9317, 6 p.Conference Paper

Structure-property relationships in polyamide 12/halloysite nanotube nanocompositesLECOUVET, B; GUTIERREZ, J. G; SCLAVONS, M et al.Polymer degradation and stability. 2011, Vol 96, Num 2, pp 226-235, issn 0141-3910, 10 p.Article

Tribological properties and scratch healing of a typical automotive nano clearcoat modified by a polyhedral oligomeric silsesquioxane compoundYARI, H; MOHSENI, M; MESSORI, M et al.European polymer journal. 2014, Vol 60, pp 79-91, issn 0014-3057, 13 p.Article

Aliphatic/aromatic copolyesters containing biobased ω-hydroxyfatty acids: Synthesis and structure―property relationshipsCELLI, Annamaria; MARCHESE, Paola; SULLALTI, Simone et al.Polymer (Guildford). 2013, Vol 54, Num 15, pp 3774-3783, issn 0032-3861, 10 p.Article

Analysis and Thermo-Mechanical Characterization of Mixed Plastic WastesSANCHEZ-SOTO, Miguel; LLUISA MASPOCH, Maria; IGNACIO VELASCO, Jose et al.Polymer-plastics technology and engineering (Softcover ed). 2013, Vol 52, Num 1-3, pp 16-23, issn 0360-2559, 8 p.Article

Novel polyesteramide-based di- and triblock copolymers: From thermo-mechanical properties to hydrolytic degradationDESHAYES, Gaëlle; DELCOURT, Cécile; VERBRUGGEN, Ingrid et al.European polymer journal. 2011, Vol 47, Num 1, pp 98-110, issn 0014-3057, 13 p.Article

Nano clay reinforced PCL/starch blends obtained by high energy ball millingVERTUCCIO, Luigi; GORRASI, Giuliana; SORRENTINO, Andrea et al.Carbohydrate polymers. 2009, Vol 75, Num 1, pp 172-179, issn 0144-8617, 8 p.Article

Molecular engineering and properties of chitin based shape memory polyurethanesBARIKANI, Mehdi; KHALID MAHMOOD ZIA; IJAZ AHMAD BHATTI et al.Carbohydrate polymers. 2008, Vol 74, Num 3, pp 621-626, issn 0144-8617, 6 p.Article

Plasticizing effect of ionic liquid on cellulose acetate obtained by melt processingBENDAOUD, Amine; CHALAMET, Yvan.Carbohydrate polymers. 2014, Vol 108, pp 75-82, issn 0144-8617, 8 p.Article

Experimental and numerical investigations on flexural and thermal properties of nanoclay―epoxy nanocompositesZAINUDDIN, S; HOSUR, M. V; ZHOU, Y et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 29-30, pp 7920-7926, issn 0921-5093, 7 p.Article

Hydrolytic degradation and functional stability of a segmented shape memory poly(ester urethane)PRETSCH, Thorsten; JAKOB, Ines; MÜLLER, Werner et al.Polymer degradation and stability. 2009, Vol 94, Num 1, pp 61-73, issn 0141-3910, 13 p.Article

Induction heating apparatus for high temperature testing of thermo-mechanical propertiesCODRINGTON, J; NGUYEN, P; HO, S. Y et al.Applied thermal engineering. 2009, Vol 29, Num 14-15, pp 2783-2789, issn 1359-4311, 7 p.Article

Hydrothermally resistant thermally reduced graphene oxide and multi-wall carbon nanotube based epoxy nanocompositesSTARKOVA, O; CHANDRASEKARAN, S; PRADO, L. A. S. A et al.Polymer degradation and stability. 2013, Vol 98, Num 2, pp 519-526, issn 0141-3910, 8 p.Article