Thermoelastohydrodynamic theory for analysis of sleeve bearings in turbo-compressorsBATKIS, G. S.Chemical and petroleum engineering. 2002, Vol 38, Num 1-2, pp 81-88, issn 0009-2355Article

On the maximum allowable loads in the thermo-elastohydrodynamic lubricationRODKIEWICZ, C. M; HUANG, P.Journal of tribology. 1998, Vol 120, Num 3, pp 470-475, issn 0742-4787Article

Numerical analysis of grease thermal elastohydrodynamic lubrication problems using the Herschel-Bulkley modelYOO, J.-G; KIM, K.-W.Tribology international. 1997, Vol 30, Num 6, pp 401-408, issn 0301-679XArticle

Comportement thermo-visco-élastique d'une huile dans un contact élastohydrodynamique = Thermo-visco-elastic behaviour of an oil in an elastohydrodynamic contactCHAOMLEFFEL, J. P; DALMAZ, G.Revue générale de thermique. 1987, Vol 26, Num 308-309, pp 451-454, issn 0035-3159Article

Formation mechanism of steady multi-dimples in thermal EHL point contactsKANETA, M; YANG, P.Journal of tribology. 2003, Vol 125, Num 2, pp 241-251, issn 0742-4787, 11 p.Article

Transient thermoelastohydrodynamic analysis for safe operating conditions of a tilting-pad journal bearing during start-upMONMOUSSEAU, P; FILLON, M.Tribology international. 2000, Vol 33, Num 3-4, pp 225-231, issn 0301-679XConference Paper

Transient thermoelasto-hydrodynamic study of tilting-pad journal bearings under dynamic loadingMONMOUSSEAU, P; FILLON, M; FRENE, J et al.Journal of engineering for gas turbines and power. 1998, Vol 120, Num 2, pp 405-409, issn 0742-4795Article

Numerical simulation of traction in rolling/sliding contactsWANG, J; TAN, J.Journal of tribology. 1997, Vol 119, Num 4, pp 869-874, issn 0742-4787Article

Three-dimensional thermoelastohydrodynamic analysis of pivoted pad thrust bearings. I: Treatment of bearing deflections and fluid film flow and heat transferALI EL-SAIE, Y. M. H; FENNER, R. T.Proceedings of the Institution of Mechanical Engineers. Part C. Mechanical engineering science. 1988, Vol 202, Num 1, pp 39-50, issn 0263-7154Article

Effets thermiques dans les paliers hydrodynamiques: aspects théoriques et expérimentaux = Thermal effects in hydrodynamics journal bearings: Theory and experimentsBONCOMPAIN, R; FILLON, M; FRENE, J et al.Journal de mécanique théorique et appliquée. 1987, Vol 6, Num 2, pp 253-293, issn 0750-7240Article

A numerical investigation of local effects on the global behavior of TEHD highly loaded circular contactsHABCHI, W; VERGNE, P; FILLOT, N et al.Tribology international. 2011, Vol 44, Num 12, pp 1987-1996, issn 0301-679X, 10 p.Article

A mixed-TEHD analysis and experiment of journal bearings under severe operating conditionsYANSONG WANG; CHAO ZHANG; WANG, Q. Jane et al.Tribology international. 2002, Vol 35, Num 6, pp 395-407, issn 0301-679XArticle

On the theory of thermal elastohydrodynamic lubrication at high slide-roll ratios: Circular glass-steel contact solution at opposite slidingFENG GUO; PEIRAN YANG; SHIYUE OU et al.Journal of tribology. 2001, Vol 123, Num 4, pp 816-821, issn 0742-4787Article

Contact and elastohydrodynamic analysis of worm gears. Part 1 : theoretical formulationSHARIF, K. J; KONG, S; EVANS, H. P et al.Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science. 2001, Vol 215, Num 7, pp 817-830, issn 0954-4062Article

Characteristics of a new type of cylindrical worm-gear driveSIMON, V. V.Journal of mechanical design (1990). 1998, Vol 120, Num 1, pp 139-146, issn 1050-0472Article

Numerical analysis of non-Newtonian TEHL line contact problem based on real-coded genetic algorithmQIU, M; LU, J; YIN, Y et al.Tribology international. 2009, Vol 42, Num 7, pp 1052-1060, issn 0301-679X, 9 p.Article

A three-dimensional TEHD model and an optimum surface profile design of pivoted pad thrust bearings with large dimensionsXIAOYANG YUAN; JUN ZHU; ZHILAN CHEN et al.Tribology transactions. 2003, Vol 46, Num 2, pp 153-160, issn 1040-2004, 8 p.Conference Paper

On the thermal elastohydrodynamic lubrication in opposite sliding circular contactsGUO, F; YANG, P; WONG, P. L et al.Tribology international. 2001, Vol 34, Num 7, pp 443-452, issn 0301-679XArticle

Modélisation du contact lubrifié-exemple de la mise en forme des métaux = Lubricated contact modelling -the example of metal forming processesMONTMITONNET, Pierre.Mécanique & industries. 2000, Vol 1, Num 6, pp 621-637, issn 1296-2139Article

Thrust bearings in the 2-D thermal elastohydrodynamic lubrication : On the slider velocity corresponding to the maximum load©HUANG, P; RODKIEWICZ, C. M.Tribology transactions. 1999, Vol 42, Num 3, pp 523-528, issn 1040-2004Article

Temperature rise due to sliding in rolling/sliding elastohydrodynamic lubrication line contacts : an efficient numerical analysis for contact zone temperaturesPANDEY, R. K; GHOSH, M. K.Tribology international. 1998, Vol 31, Num 12, pp 745-752, issn 0301-679XArticle

A mixed-TEHD model for journal-bearing conformal contact. Part II : Contact, film thickness, and performance analysesQIAN WANG; FANGHUI SHI; LEE, C et al.Journal of tribology. 1998, Vol 120, Num 2, pp 206-213, issn 0742-4787Conference Paper

A mixed-TEHD model for journal-bearing conformal contacts. Part I : Model formulation and approximation of heat transfer considering asperity contactFANGHUI SHI; QIAN WANG.Journal of tribology. 1998, Vol 120, Num 2, pp 198-205, issn 0742-4787Conference Paper

Thermo-EHD analysis of lubrication of helical gearsSIMON, V.Journal of mechanisms, transmissions, and automation in design. 1988, Vol 110, Num 3, pp 330-338, issn 0738-0666Article

PTFE-faced centre pivot thrust pad bearings : Factors affecting TEHD performanceFILLON, M; GLAVATSKIH, S. B.Tribology international. 2008, Vol 41, Num 12, pp 1219-1225, issn 0301-679X, 7 p.Article