Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporationGIRAUD, Isabelle; FRANCESCHI-MESSANT, Sophie; PEREZ, Emile et al.Applied surface science. 2013, Vol 266, pp 94-99, issn 0169-4332, 6 p.Article

Determination of Energy Release Rate in carbon fiber-thermoplastic composites and comparison of crack propagation in amorphous and crystalline interface by single fiber pullout testRAMANATHAN, T; SCHULZ, E; SUBRAMANIAN, K et al.Journal of reinforced plastics and composites. 2004, Vol 23, Num 15, pp 1639-1650, issn 0731-6844, 12 p.Article

Injection Molding and its application to drug deliveryZEMA, Lucia; LORETI, Giulia; MELOCCHI, Alice et al.Journal of controlled release. 2012, Vol 159, Num 3, pp 324-331, issn 0168-3659, 8 p.Article

Hybrid bendable stamp copies for molding fabricated by nanoimprint lithographySCHIFT, Helmut; PARK, Sunggook; GOBRECHT, Jens et al.Microelectronic engineering. 2005, Vol 78-79, pp 605-611, issn 0167-9317, 7 p.Conference Paper

Thermoplastic semi-IPN of polypropylene (PP) and polymeric N-halamine for efficient and durable antibacterial activityNAN ZHAO; SONG LIU.European polymer journal. 2011, Vol 47, Num 8, pp 1654-1663, issn 0014-3057, 10 p.Article

Experimental and numerical study of polypropylene behavior using an hyper-visco-hysteresis constitutive lawZRIDA, M; LAURENT, H; RIO, G et al.Computational materials science. 2009, Vol 45, Num 2, pp 516-527, issn 0927-0256, 12 p.Article

Perforated polymer membranes fabricated by nanoimprintSCHIFT, Helmut; BELLINI, Sandro; GOBRECHT, Jens et al.Microelectronic engineering. 2006, Vol 83, Num 4-9, pp 873-875, issn 0167-9317, 3 p.Conference Paper

Response of semi-crystalline thermoplastic polymers to dynamic loading: A finite element studySERBAN, Dan Andrei; MARSAVINA, Liviu; SILBERSCHMIDT, Vadim V et al.Computational materials science. 2012, Vol 64, pp 116-121, issn 0927-0256, 6 p.Conference Paper

The sliding friction of thermoplastic polymer composites tested at low speedsLIU, Y; SCHAEFER, J. A.Wear. 2006, Vol 261, Num 5-6, pp 568-577, issn 0043-1648, 10 p.Article

Water absorption behavior and mechanical properties of lignocellulosic filler-polyolefin bio-compositesYANG, Han-Seung; KIM, Hyun-Joong; PARK, Hee-Jun et al.Composite structures. 2006, Vol 72, Num 4, pp 429-437, issn 0263-8223, 9 p.Article

Processing, Properties, and Applications of Polymer Nanocomposites Based on Layer Silicates: A ReviewALATEYAH, A. I; DHAKAL, H. N; ZHANG, Z. Y et al.Advances in polymer technology. 2013, Vol 32, Num 4, issn 0730-6679, 21368.1-21368.36Article

A novel approach to analyze photoinduced effects in a DR1 dye-doped hybrid nanocomposite filmMAHDAVI, H. R. S; MOHAJERANI, E; MOHSENI, M et al.Journal of sol-gel science and technology. 2009, Vol 52, Num 1, pp 82-87, issn 0928-0707, 6 p.Article

Thermoplastic Vinyl Polymers: From Macro to NanostructureMALLAKPOUR, Shadpour; ZADEHNAZARI, Amin.Polymer-plastics technology and engineering (Softcover ed). 2013, Vol 52, Num 13-15, pp 1423-1466, issn 0360-2559, 44 p.Article

Thermal properties of lignocellulosic filler-thermoplastic polymer bio-compositesYANG, H.-S; WOLCOTT, M. P; KIM, H.-S et al.Journal of thermal analysis and calorimetry. 2005, Vol 82, Num 1, pp 157-160, issn 1388-6150, 4 p.Article

Monitoring Nonisothermal Crystallization of Thermoplastic Polymers Using a Quartz Crystal ResonatorBYOUNG CHUL KIM; MAEDA, Kouji; YOUNG HAN KIM et al.Journal of applied polymer science (Print). 2011, Vol 120, Num 6, pp 3370-3380, issn 0021-8995, 11 p.Article

Thermoplastic Nonvinyl Polymers: From Macro to NanostructureMALLAKPOUR, Shadpour; ZADEHNAZARI, Amin.Polymer-plastics technology and engineering (Softcover ed). 2014, Vol 53, Num 4-7, pp 564-587, issn 0360-2559, 24 p.Article

Transforming polymer blends into composites : a pathway towards nanostructured materialsDENCHEV, Zlatan Z; DENCHEVA, Nadya V.Polymer international. 2008, Vol 57, Num 1, pp 11-22, issn 0959-8103, 12 p.Article

Synthesis of biodegradable thermoplastic copolymers based on starch by atom transfer radical polymerization (ATRP): Monolayer chain growth on starchPEYMAN NAJAFI MOGHADDAM; AMIR REZA FAREGHI; ALI AKBAR ENTEZAMI et al.Stärke. 2013, Vol 65, Num 3-4, pp 210-218, issn 0038-9056, 9 p.Article

Effects of the degree of undercooling on flow induced crystallization in polymer meltsCOPPOLA, Salvatore; BALZANO, Luigi; GIOFFREDI, Emilia et al.Polymer (Guildford). 2004, Vol 45, Num 10, pp 3249-3256, issn 0032-3861, 8 p.Article

Thermogravimetry and Dynamic Mechanical Analysis of Iron Silicon Particle filled PolypropyleneKIRCHBERG, S; ZIEGMANN, G.Journal of composite materials. 2009, Vol 43, Num 12, pp 1323-1334, issn 0021-9983, 12 p.Article

Thermoplastic Polymer Shrinkage in Emerging Molding ProcessesGERSHON, A. L; GYGER, L. S; BRUCK, H. A et al.Experimental mechanics. 2008, Vol 48, Num 6, pp 789-798, issn 0014-4851, 10 p.Article

Fabrication of new composite abrasive for jet machining and application to scrap wafer regenerationKE, J.-H; TSAI, F.-C; HUNG, J.-C et al.Proceedings of the Institution of Mechanical Engineers. Part E, Journal of process mechanical engineering. 2012, Vol 226, Num 1, pp 3-11, issn 0954-4089, 9 p.Article

Studies on Mechanical Characterization and Water Resistance of Glass Fiber/Thermoplastic Polymer BionanocompositesKORD, Behzad.Journal of applied polymer science. 2012, Vol 123, Num 4, pp 2391-2396, issn 0021-8995, 6 p.Article

Thermo-mechanical model to predict the tribological behaviour of the composite PEEK-CF30/steel pair in dry sliding using multiple regression analysisDAVIM, J. Paulo; CARDOSO, Rosaria.Industrial Lubrication and Tribology. 2005, Vol 57, Num 5, pp 181-186, issn 0036-8792, 6 p.Article