Understanding Influence of MoSi₂ Addition (5 Weight Percent) on Tribological Properties of TiB₂MUKHOPADHYAY, Amartya; RAJU, G. B; BASU, Bikramjit et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 12, pp 2998-3013, issn 1073-5623, 16 p.Article

Thermal-Treated Pitches as Binders for TiB₂/C Composite CathodesLÜ, Xiao-Jun; JIAN XU; JIE LI et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2012, Vol 43, Num 1, pp 219-227, issn 1073-5623, 9 p.Article

Direct Observation of Wetting and Spreading of Molten Aluminum on TiB₂ in the Presence of a Molten Flux from the Aluminum Melting Point up to 1033 K (760 °C)MUTALE, Christian T; KRAFICK, William J; WEIRAUCH, Douglas A et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2010, Vol 41, Num 6, pp 1368-1374, issn 1073-5615, 7 p.Article

Processing and properties of titanium-titanium boride (TiB_w) matrix composites- : a reviewMORSI, K; PATEL, V. V.Journal of materials science. 2007, Vol 42, Num 6, pp 2037-2047, issn 0022-2461, 11 p.Article

The Compton profiles of TiB₂ and VB₂ = Les profils de Compton de TiB₂ et VB₂ = Die Compton-Profile von TiB₂ und VB₂MAHAPATRA, D.P; PADHI, H.C.Physica status solidi. B. Basic research. 1983, Vol 115, Num 2, pp K101-K105, issn 0370-1972Article

Effects of M₂CO₃ (M=Li, Na, K) on electrolytic boronising of titanium in Na₂B₄O₇ meltsHUANG, Y.-G; CHEN, J.-R; ZHANG, M.-L et al.Surface engineering. 2014, Vol 30, Num 2, pp 134-137, issn 0267-0844, 4 p.Article

Synthesis and characterization of nano-structured TiB₂ processed by milling assisted SHS routeNOZARI, A; ATAIE, A; HESHMATI-MANESH, S et al.Materials characterization. 2012, Vol 73, pp 96-103, issn 1044-5803, 8 p.Article

Microstructure and mechanical behavior of AlSiCuMgNi piston alloys reinforced with TiB₂ particlesZHAO, D. G; LIU, X. F; PAN, Y. C et al.Journal of materials science. 2006, Vol 41, Num 13, pp 4227-4232, issn 0022-2461, 6 p.Article

Ternary diffusion coefficients : Theoretical treatment and application to the in-situ-reinforced TiB₂/Al compositeJIANQI CHEN; TONGXIANG FAN; DI ZHANG et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 7, pp 2275-2281, issn 1073-5623, 7 p.Article

Thermodynamic effect of alloying addition on in-situ reinforced TiB²/Al compositesTONGXIANG FAN; GUANG YANG; DI ZHANG et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 1, pp 225-233, issn 1073-5623, 9 p.Article

Quality evaluation of coatings by automatic scratch testingBHANSALI, K. J; KATTAMIS, T. Z.Wear. 1990, Vol 141, Num 1, pp 59-71, issn 0043-1648Article

Solubilité du titane et du bore dans l'aluminium liquide en équilibre avec TiB₂ = Solubility of titanium and boron in liquid aluminium in equilibrium with TiB₂ABDEL-HAMID, A; DURAND, F.Mémoires et études scientifiques de la revue de métallurgie. 1983, Vol 80, Num 10, pp 591-596, issn 0245-8292Article

Growth kinetics of titanium borides produced by CRTD-Bor methodKARTAL, G; TIMUR, S.Surface & coatings technology. 2013, Vol 215, pp 440-446, issn 0257-8972, 7 p.Conference Paper

Fabrication and properties of mechanically alloyed and Ni activated sintered W matrix composites reinforced with Y₂O₃ and TiB₂ particlesGENC, A; COSKUN, S; ÖUECOGLU, M. L et al.Materials characterization. 2010, Vol 61, Num 7, pp 740-748, issn 1044-5803, 9 p.Article

Development of Titanium Weld Metal Reinforced by Titanium Mono-borideTERASAKI, Hidenori; KOMIZO, Yu-Ichi; SAIKI, Keita et al.ISIJ international. 2008, Vol 48, Num 5, pp 624-627, issn 0915-1559, 4 p.Article

Effective elastic moduli of Al-Si composites reinforced in situ with TiB₂ particlesHONGZHAN YI; NAIHENG MA; YIJIE ZHANG et al.Scripta materialia. 2006, Vol 54, Num 6, pp 1093-1097, issn 1359-6462, 5 p.Article

Revêtements composites TiAl₃-TiB₂ sur le titane = Composite TiAl₃-TiB₂ coatings on titaniumKABBAJ, M; GALERIE, A; CAILLET, M et al.Journal of the less-common metals. 1986, Vol 115, Num 2, pp 217-224, issn 0022-5088Article

Toughening magnetron sputtered TiB₂ coatings by Ni additionHUAIYONG WANG; BO WANG; SHENGZHI LI et al.Surface & coatings technology. 2013, Vol 232, pp 767-774, issn 0257-8972, 8 p.Article

Influence of the Processing Route in the Microstructure and Mechanical Properties of NiAl/TiB₂ Composites Produced by Combustion SynthesisTORRES, Ricardo D; LEPIENSKI, Carlos M; MOORE, John J et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2009, Vol 40, Num 2, pp 187-195, issn 1073-5615, 9 p.Article

Microstructure and mechanical properties of TiB₂/(Cu, Ni) interpenetrating phase compositesXINGHONG ZHANG; CHANGQING HONG; JIECAI HAN et al.Scripta materialia. 2006, Vol 55, Num 6, pp 565-568, issn 1359-6462, 4 p.Article

Cohesion and Toughness Improvement of Pitch Binder by Thermosetting Resin Modification for TiB₂/C Composite CathodeLÜ, Xiao-Jun; HOU, Jin-Long; LAI, Yan-Qing et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 9, pp 4360-4365, issn 1073-5623, 6 p.Article

Effect of Temperature on the Wear Behavior of Al-7Si-TiB₂ In-Situ CompositesKUMAR, S; SUBRAMANYA SARMA, V; MURTY, B. S et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2009, Vol 40, Num 1, pp 223-231, issn 1073-5623, 9 p.Article

Electrochemical corrosion behavior of Al―Si alloy composites reinforced with in situ TiB₂ particulateSUN, H. H; CHEN, D; LI, X. F et al.Materials and corrosion (1995). 2009, Vol 60, Num 6, pp 419-423, issn 0947-5117, 5 p.Article

Low temperature deposition with inductively coupled plasmaLEE, Seung-Hoon; JUNG, Dong-Ha; JUNG, Seung-Jae et al.International journal of materials research. 2006, Vol 97, Num 4, pp 475-479, issn 1862-5282, 5 p.Article

Recent developments of aluminium - wettable cathodes for the primary aluminium industry. IIPAWLEK, R. P.Aluminium (Düsseldorf). 1996, Vol 72, Num 1-2, pp 35-41, issn 0002-6689Article