Properties of titanium carbonitride matrix cermetsHOUAN ZHANG; JIANHUI YAN; XIN ZHANG et al.International journal of refractory metals & hard materials. 2006, Vol 24, Num 3, pp 236-239, issn 0958-0611, 4 p.Article

Experimentelle Untersuchungen über Schneid-und Verschleißcharakteristiken der TiCN-CrN-beschichteten C 80-Stähle = Investigations into the Cutting and Wear Characteristics of TiCN-CrN Coated C 80 SteelsCAKAN, Ahmet; OZKANER, Vedat; YILDIRIM, M. Mustafa et al.Praktische Metallographie. 2008, Vol 45, Num 6, pp 283-296, issn 0032-678X, 14 p.Article

2014 based MMCs : Properties improvement by (TiCN)_p and trace additionsRUIZ-NAVAS, E. M; DELGADO, M. L; TORRALBA, J. M et al.Journal of materials science. 2006, Vol 41, Num 12, pp 3735-3741, issn 0022-2461, 7 p.Article

Microstructure analysis of RF plasma synthesized TiCN nanopowdersLEPAROUX, M; KIHN, Y; PARIS, S et al.International journal of refractory metals & hard materials. 2008, Vol 26, Num 4, pp 277-285, issn 0958-0611, 9 p.Article

Effect of presintering treatments on TiMoCN-Ni based cermets processed from different powder mixturesRODRIGUEZ, N; SANCHEZ, J. M.International journal of refractory metals & hard materials. 2009, Vol 27, Num 1, pp 164-172, issn 0958-0611, 9 p.Article

Comparison of tribological behaviour of TiN, TiCN and CrN at elevated temperaturesPOLCAR, T; KUBART, T; NOVAK, R et al.Surface & coatings technology. 2005, Vol 193, Num 1-3, pp 192-199, issn 0257-8972, 8 p.Conference Paper

Oxidation and tribological behaviour of an Fe-based MMC reinforced with TiCN particlesGOMEZ, B; JIMENEZ-SUAREZ, A; GORDO, E et al.International journal of refractory metals & hard materials. 2009, Vol 27, Num 2, pp 360-366, issn 0958-0611, 7 p.Conference Paper

Hartmetalle der neuen Generation = Hard metals of the new generationKOLASKA, H; ETTMAYER, P.Metall (Berlin, West). 1993, Vol 47, Num 10, pp 908-914, issn 0026-0746Article

Plasma cermet coatings based on titanium carbonitride = Projection au plasma de matériaux composites à base de carbonitrure de titaneZASHLYAPIN, M. YU.Welding Production. 1986, Vol 33, Num 1, pp 13-14, issn 0043-230XArticle

Moderate temperature CVD process for carbide tools = Neues Dampfabscheidungsverfahren zur Beschichtung von HartmetallwerkzeugenInternational journal of refractory & hard metals. 1984, Vol 3, Num 3, issn 0263-4368, 116Article

Influence of the C content on the mechanical and tribological properties of the TiCN coatings deposited by LAFAD techniqueCHENG, Y. H; BROWNE, T; HECKERMAN, B et al.Surface & coatings technology. 2011, Vol 205, Num 16, pp 4024-4029, issn 0257-8972, 6 p.Article

Fretting Wear Properties of TiCN-Ni Cermets : Influence of Load and Secondary Carbide AdditionMANOJ KUMAR, B. V; BASU, Bikramjit.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 3, pp 539-550, issn 1073-5623, 12 p.Article

Titanium carbonitride coating by pulsed electrical discharge in an aqueous solution of ethanolamineHOUQUN XIAO; XIAOHUA JIE; ZHAOYUBO ZENG et al.Surface & coatings technology. 2014, Vol 258, pp 1006-1010, issn 0257-8972, 5 p.Article

Development of dark Ti(C,O,N) coatings prepared by reactive sputteringCHAPPE, J. M; VAZ, F; CUNHA, L et al.Surface & coatings technology. 2008, Vol 203, Num 5-7, pp 804-807, issn 0257-8972, 4 p.Conference Paper

Properties of arc plasma deposited TiCN/ZrCN superlattice coatingsBALACEANU, M; BRAIC, M; BRAIC, V et al.Surface & coatings technology. 2005, Vol 200, Num 1-4, pp 1084-1087, issn 0257-8972, 4 p.Conference Paper

Thermodynamics of TiCN and tic in Fe-C_sat meltsLI, Y; FRUEHAN, R. J.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2001, Vol 32, Num 6, pp 1203-1205, issn 1073-5615Article

Effect of ion bombardment on structural, mechanical, erosion and corrosion properties of Ti-Si-C-N nanocomposite coatingsABD EL-RAHMAN, A. M; RONGHUA WEI.Surface & coatings technology. 2014, Vol 258, pp 320-328, issn 0257-8972, 9 p.Article

Formation of wear resistant coatings on Ti―6Al―4V by calciothermic reductionMOORHOUSE, B. S; REDDYHOFF, T; WARD-CLOSE, M et al.Surface & coatings technology. 2013, Vol 221, pp 214-221, issn 0257-8972, 8 p.Article

Synthesizing, microstructure and microhardness distribution of Ti―Si―C―N/TiCN composite coating on Ti―6A1―4V by laser claddingYULING YANG; NA GUO; JINFENG LI et al.Surface & coatings technology. 2013, Vol 219, pp 1-7, issn 0257-8972, 7 p.Article

Effect of submicron Ti(C,N) on the microstructure and the mechanical properties of Ti(C,N)-based cermetsDEMOLY, A; LENGAUER, W; VEITSCH, C et al.International journal of refractory metals & hard materials. 2011, Vol 29, Num 6, pp 716-723, issn 0958-0611, 8 p.Article

Electro-discharge machining performance of TiCN-based cermetsMANOJ KUMAR, B. V; RAMKUMAR, J; BASU, Bikramjit et al.International journal of refractory metals & hard materials. 2007, Vol 25, Num 4, pp 293-299, issn 0958-0611, 7 p.Article

Synthesis and characterization of super hard, self-lubricating Ti-Si-C-N nanocomposite coatingsMA, S. L; MA, D. Y; GUO, Y et al.Acta materialia. 2007, Vol 55, Num 18, pp 6350-6355, issn 1359-6454, 6 p.Article

Effects of carbon content and annealing temperature on the microstructure and hardness of super hard Ti-Si-C-N nanocomposite coatings prepared by pulsed d.c. PCVDYAN GUO; SHENGLI MA; KEWEI XU et al.Surface & coatings technology. 2007, Vol 201, Num 9-11, pp 5240-5243, issn 0257-8972, 4 p.Conference Paper

An investigation of tool chip contact phenomena in high-speed turning using coated toolsMATIVENGA, P. T; ABUKHSHIM, N. A; SHEIKH, M. A et al.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2006, Vol 220, Num 5, pp 657-667, issn 0954-4054, 11 p.Article

Syntheses and mechanical properties of Ti-B-C-N coatings by a plasma-enhanced chemical vapor depositionKWANG HO KIM; JUNG TAE OK; ABRAHAM, Sudeep et al.Surface & coatings technology. 2006, Vol 201, Num 7, pp 4185-4189, issn 0257-8972, 5 p.Conference Paper