Possible instability of a rectilinear crack path in an orthotropic plane at uniaxial normal tensionGOLDSTEIN, R. V; SHIFRIN, E. I.Mechanics of solids. 2007, Vol 42, Num 3, pp 356-366, issn 0025-6544, 11 p.Article

Effect of plastic deformation on the acoustoelastic response of some materialsDAAMI, T; TOURATIER, M; CASTEX, L et al.Experimental mechanics. 1987, Vol 27, Num 4, pp 333-337, issn 0014-4851Article

Half-fringe photoelastic determination of opening mode stress intensity factor for edge cracked stripsWEI-CHUNG WANG; TSAI-LIN CHEN.Engineering fracture mechanics. 1989, Vol 32, Num 1, pp 111-122, issn 0013-7944Article

Effects of elasticity differences between substrate and coating on the state of stress and strain in a composite. Part 2. Coating tensile stress distributionDOLGOV, N. A; LYASHENKO, B. A; RUSHCHITSKII, YA. YA et al.Strength of materials. 1996, Vol 28, Num 5, pp 373-375, issn 0039-2316Article

Selection of kernel functions used in a new constitutive equation for viscoelastic fluidsTREMBLAY, B; PIAU, J. M; CARREAU, P. J et al.Rheologica acta. 1986, Vol 25, Num 3, pp 214-224, issn 0035-4511Article

DETERMINING THE STRESS STATE OF A STRETCHED ROD FROM ITS MEASURED MAGNETIC CHARACTERISTICSGORKUNOV, E. S; EMEL'YANOV, I. G; MITROPOL'SKAYA, S. Yu et al.Journal of applied mechanics and technical physics. 2008, Vol 49, Num 5, pp 877-882, issn 0021-8944, 6 p.Article

Plastic instability and strain to fracture for damaged materialsJIANSHE LIAN; JIWEI CHEN.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1991, Vol 131, Num 1, pp 9-15, issn 0921-5093Article

Instabilité rotationnelle des trichites cristallines de silicium déformées plastiquement par tractionANTIPOV, S. A; BATARONOV, I. L; DROZHZHIN, A. I et al.Kristallografiâ. 1989, Vol 34, Num 3, pp 702-705, issn 0023-4761Article

Analysis of a power-law material containing a single hole subjected to a unixial tensile stress using the complex pseudo-stress functionLEE, Y. S; SMITH, L. C.Journal of applied mechanics. 1988, Vol 55, Num 2, pp 267-274, issn 0021-8936Article

Directional model for anisotropic hyperelastic rubber-like materialsDIANI, J; BRIEU, M; VACHERAND, J. M et al.Journal de physique. IV. 2003, Vol 105, pp 281-288, issn 1155-4339, 8 p.Conference Paper

Behaviour of large concrete specimens in uniaxial tension = Comportement d'échantillons de grande dimension sous traction uniaxialeLi, O; Duan, Y; Wang, G et al.Magazine of Concrete Research. 2002, Vol 54, Num 5, pp 385-391, issn 0024-9831, 7 p.Article

Effect of strain gradients on the size effect of concrete in uniaxial tensionVAN VLIET, M. R. A; VAN MIER, J. G. M.International journal of fracture. 1999, Vol 95, Num 1-4, pp 195-219, issn 0376-9429Conference Paper

Determination of fracture toughness by uniaxial tensile testOH, H.-K.Engineering fracture mechanics. 1996, Vol 55, Num 5, pp 865-868, issn 0013-7944Article

The dugdale solution for cracks at the edge of an elliptical hole in an infinite and finite plateKAM, K. Y; TAY, T. E; WANG, W et al.Engineering fracture mechanics. 1996, Vol 53, Num 1, pp 97-106, issn 0013-7944Article

The stressed state of a broad strip in uniaxial tensionBASTUN, V. N.Strength of materials. 1995, Vol 27, Num 8, pp 461-463, issn 0039-2316Article

Comportements micro-macroscopique d'un assemblage collé de type tenon-mortaise sollicité en traction uniaxiale = Mechanical behaviour (micro and macroscopic) of a adhesive bonded mortice and tenon joint in uniaxial tension loadingFARGETTE, B; GILIBERT, Y; RIMLINGER, L et al.Mécanique industrielle et matériaux. 1993, Vol 46, Num 1, pp 16-20, issn 1244-9091Article

The influence of fibre-matrix interfacial bond strength on the mechanical properties of steel fibre reinforced mortars = L'influence de la contrainte d'adhérence de l'interface fibre-matrice sur les propriétés mécaniques des mortiers armés de fibres d'acierGRAY, R. J; JOHNSTONT, C. D.International journal of cement composites and lightweight concrete. 1987, Vol 9, Num 1, pp 43-55, issn 0262-5075Article

Fracture behaviour of ceramic foils in uni- and biaxial tensionBAO, Y. W; STEINBRECH, R. W.Key engineering materials. 1997, pp 480-483, issn 1013-9826, isbn 0-87849-761-7, 3VolConference Paper

Elastic response of flexible polyurethane foams in uniaxial tensionEL-RATAL, W. H; MALLICK, P. K.Journal of engineering materials and technology. 1996, Vol 118, Num 2, pp 157-161, issn 0094-4289Article

Failure mechanism in concrete plates reinforced in only one direction = Mécanisme de rupture dans les dalles en béton armées dans une seule directionZARARIS, P.D.Journal of structural engineering (New York, NY). 1995, Vol 121, Num 8, pp 1161-1169, issn 0733-9445Article

Isochromatic lines and dynamic punching of a stressed elastic plateBARCLAY, D. W; TAIT, R. J; MOODIE, T. B et al.Quarterly of applied mathematics. 1987, Vol 44, Num 4, pp 757-772, issn 0033-569XArticle

Post-yield fracture mechanics analysis of the combined thermal and mechanical loading of a centre-cracked plateHELLEN, T. K; BLACKBURN, W. S.International journal of fracture. 1986, Vol 32, Num 3, pp 185-199, issn 0376-9429Article

Designing micro-patterned Ti films that survive up to 10% applied tensile strainWOO, Noble C; CHERENACK, Kunigunde; TRÖSTER, Gerhard et al.Applied physics. A, Materials science & processing (Print). 2010, Vol 100, Num 1, pp 281-285, issn 0947-8396, 5 p.Article

Derivation of tensile flow characteristics for austenitic materials from instrumented indentation techniqueLEE, K.-W; KIM, K.-H; KIM, J.-Y et al.Journal of physics. D, Applied physics (Print). 2008, Vol 41, Num 7, issn 0022-3727, 074014.1-074014.6Conference Paper

Monitoring the strain-rate progression of an aluminium sample undergoing tensile deformation by electronic speckle-pattern interferometry (ESPI)CORDERO, Raul R; LABBE, Fernando.Journal of physics. D, Applied physics (Print). 2006, Vol 39, Num 11, pp 2419-2426, issn 0022-3727, 8 p.Article