Pyrolysis behavior of organic-inorganic hybrids with Si-O-Nb/Si-O-Ta oxygen bridged heterometallic bondsFUKUSHIMA, Manabu; YASUDA, Eiichi; NAKAMURA, Yoshiyuki et al.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2003, Vol 111, Num 11, pp 857-859, issn 0914-5400, 3 p.Article

In situ speckle observation of Tyrano/BMAS composites in shear strength measurementsTANABE, Yasuhiro; ISHIGURO, Yohsuke; YASUDA, Eiichi et al.Composites. Part B, Engineering. 2003, Vol 34, Num 4, pp 399-403, issn 1359-8368, 5 p.Article

Thermal stability of shock-compacted diamondOHKOSHI, Masahiro; AKASHI, Tamotsu; YASUDA, Eiichi et al.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2001, Vol 109, Num 5, pp 377-379, issn 0914-5400Article

Oxidation kinetics and mechanisms of a 2D-C/C compositeWEIMING GUO; HANNING XIAO; YASUDA, Eiichi et al.Carbon (New York, NY). 2006, Vol 44, Num 15, pp 3269-3276, issn 0008-6223, 8 p.Article

Combined mode-I and mode-II fracture of ceramics with crack-face grain and/or whisker bridgingAKATSU, Takashi; SAITO, Kenji; TANABE, Yasuhiro et al.Philosophical magazine (2003. Print). 2003, Vol 83, Num 6, pp 745-764, issn 1478-6435, 20 p.Article

STM study on surfaces of HOPG modified by implantation and heat treatmentBOURELLE, Emmanuel; TANABE, Yasuhiro; YASUDA, Eiichi et al.Carbon (New York, NY). 2001, Vol 39, Num 10, pp 1557-1566, issn 0008-6223Article

Cross-sectional observation of surface graphitization in furan-resin-derived carbonYAMANAKA, Junji; YASUDA, Eiichi; MIGITA, Hidekazu et al.Materials transactions - JIM. 2001, Vol 42, Num 9, pp 1874-1877, issn 0916-1821Article

Effect of characteristics of materials on fracture behavior and modeling using graphite-related materials with a high-velocity steel sphereFUJII, Keisuke; YASUDA, Eiichi; AKATSU, Takashi et al.International journal of impact engineering. 2003, Vol 28, Num 9, pp 985-999, issn 0734-743X, 15 p.Article

Analysis of the oxidation behavior of neat and Ta-alloyed glass-like carbons heat-treated at 1200 and 3000 °C by nitric, sulfuric and hydrofluoric acidNAKAMURA, Kazumasa; TANABE, Yasuhiro; YASUDA, Eiichi et al.Journal of alloys and compounds. 2006, Vol 414, Num 1-2, pp 186-189, issn 0925-8388, 4 p.Article

Cage structure development in furan-resin-derived carbonYAMANAKA, Junji; YASUDA, Eiichi; MIGITA, Hidekazu et al.Materials transactions - JIM. 2001, Vol 42, Num 3, pp 453-456, issn 0916-1821Article

Dynamic mechanical properties of polycrystalline graphites and a 2D-C/C composite by plate impactFUJII, Keisuke; YASUDA, Eiichi; TANABE, Yasuhiro et al.International journal of impact engineering. 2001, Vol 25, Num 5, pp 473-491, issn 0734-743XArticle

Surface graphitization of furan-resin-derived carbonTANABE, Yasuhiro; YAMANAKA, Junji; HOSHI, Kazuhito et al.Carbon (New York, NY). 2001, Vol 39, Num 15, pp 2347-2353, issn 0008-6223Article

Orientation relationship formation in a uni-directionally solidified Al₂O₃/Ln₃Al₅O₁₂(Ln=Y, Er) Eutectic systemUENO, Shunkichi; TAKATA, Satoshi; TANABE, Yasuhiro et al.Nippon Kinzoku Gakkaishi (1952). 2001, Vol 65, Num 3, pp 135-138, issn 0021-4876Article

Bioactive coating on titanium using calcium-containing methylsiloxaneHOSHIKAWA, Yasuto; YASUDA, Eiichi; ONOKI, Takamasa et al.Surface & coatings technology. 2008, Vol 203, Num 1-2, pp 52-58, issn 0257-8972, 7 p.Article

Impact perforation behavior of CFRPs using high-velocity steel sphereFUJII, Keisuke; AOKI, Motokazu; KIUCHI, Noriyuki et al.International journal of impact engineering. 2002, Vol 27, Num 5, pp 497-508, issn 0734-743XArticle

Effect of internal stress disturbance on the stress-induced transformation toughening of an alumina/zirconia dual-phase compositeAKATSU, Takashi; NAKANISHI, Shin; TANABE, Yasuhiro et al.Philosophical magazine (2003. Print). 2004, Vol 84, Num 35, pp 3741-3754, issn 1478-6435, 14 p.Article

Fracture behavior of CFRPs impacted by relatively high-velocity steel sphereTANABE, Yasuhiro; AOKI, Motokazu; FUJII, Keisuke et al.International journal of impact engineering. 2003, Vol 28, Num 6, pp 627-642, issn 0734-743X, 16 p.Article

Effect of the size and the amount of surface functional groups of inclusions on microstructure development in furan resin-derived carbonTANABE, Yasuhiro; HOSHI, Kazuhito; ISHIBASHI, Manabu et al.Carbon (New York, NY). 2001, Vol 39, Num 2, pp 294-297, issn 0008-6223Article

Analysis of oxidation behavior under dry air of neat and ta-alloyed furan-resin-derived carbons heat treated at 3000 °CNAKAMURA, Kazumasa; TANABE, Yasuhiro; SUZUKI, Noboru et al.Surface and interface analysis. 2005, Vol 37, Num 13, pp 1137-1142, issn 0142-2421, 6 p.Article

Oil wettability and sliding properties of organic and inorganic hybrid coating films prepared from methyltriethoxysilane and various metal alkoxidesFUKUSHIMA, Manabu; YASUDA, Eiichi; KITA, Hideki et al.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2006, Vol 114, Num 6, pp 580-582, issn 0914-5400, 3 p.Article

Oxidation behavior of furan-resin-derived carbon alloyed with Ta or TiTANABE, Yasuhiro; UTSUNOMIYA, Masao; ISHIBASHI, Manabu et al.Carbon (New York, NY). 2002, Vol 40, Num 11, pp 1949-1955, issn 0008-6223Article

Microstructures and orientation relationship formation and rod-lamella transition in a uni-directionally solidified Al₂O₃/LnAlO₃(Ln = La, Nd, Sm, Gd) eutectic systemUENO, Shunkichi; TAKATA, Satoshi; TANABE, Yasuhiro et al.Nippon Kinzoku Gakkaishi (1952). 2002, Vol 66, Num 3, pp 143-146, issn 0021-4876Article

Microstructure and high-temperature internal friction of unidirectionally solidified Al₂O₃/YAG eutectic compositeTAKATA, Satoshi; UENO, Shunkichi; KAWAKAMI, Yuji et al.Nippon seramikkusu kyokai gakujutsu ronbunshi. 2001, Vol 109, Num 6, pp 561-564, issn 0914-5400Article

Effect of iodine treatment on morphological control in carbonization of polysaccharidesMIYAJIMA, Naoya; ISHIKAWA, Naoto; SAKANE, Hideto et al.Thermochimica acta. 2010, Vol 498, Num 1-2, pp 33-38, issn 0040-6031, 6 p.Article

Stress graphitization of C/C composite reinforced by carbon nanofiberMATSUI, Keitaro; LANTICSE, Leslie Joy; TANABE, Yasuhiro et al.Carbon (New York, NY). 2005, Vol 43, Num 7, pp 1577-1579, issn 0008-6223, 3 p.Article