Elastic properties of single-walled carbon nanotube clusters: Dependence on hydrostatic pressureHERASATI, Saeed; ZHANG, L. C.Computational materials science. 2014, Vol 86, pp 93-98, issn 0927-0256, 6 p.Article

Some critical issues for a reliable molecular dynamics simulation of nano-machiningCUI, D. D; MYLVAGANAM, K; ZHANG, L. C et al.Computational materials science. 2014, Vol 90, pp 23-31, issn 0927-0256, 9 p.Article

Unique corrosion behavior of Fe₇₈Si₉B₁₃ glassy alloy with different circumferential speeds under various chloride ion levelsAN, B; LI, Y. J; LIU, Y et al.Journal of alloys and compounds. 2014, Vol 593, pp 16-23, issn 0925-8388, 8 p.Article

An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fieldsGU, Y. T; WANG, W; ZHANG, L. C et al.Engineering fracture mechanics. 2011, Vol 78, Num 1, pp 175-190, issn 0013-7944, 16 p.Article

In-situ investigation of oxidation behaviour in high-speed steel roll material under dry and humid atmospheresZHU, Q; ZHU, H. T; TIEU, A. K et al.Corrosion science. 2010, Vol 52, Num 8, pp 2707-2715, issn 0010-938X, 9 p.Article

Deformation mechanisms at pop-out in monocrystalline silicon under nanoindentationCHANG, L; ZHANG, L. C.Acta materialia. 2009, Vol 57, Num 7, pp 2148-2153, issn 1359-6454, 6 p.Article

Prediction of cutting forces in machining of metal matrix compositesPRAMANIK, A; ZHANG, L. C; ARSECULARATNE, J. A et al.International journal of machine tools & manufacture. 2006, Vol 46, Num 14, pp 1795-1803, issn 0890-6955, 9 p.Article

Relativistic moving heat sourceALI, Y. M; ZHANG, L. C.International journal of heat and mass transfer. 2005, Vol 48, Num 13, pp 2741-2758, issn 0017-9310, 18 p.Article

The difference of phase distributions in silicon after indentation with Berkovich and spherical indentersZARUDI, I; ZHANG, L. C; CHEONG, W. C. D et al.Acta materialia. 2005, Vol 53, Num 18, pp 4795-4800, issn 1359-6454, 6 p.Article

Microstructural evolution of the nickel platinum-aluminide bond coat on electron-beam physical-vapor deposition thermal-barrier coatings during high-temperature serviceZHANG, L. C; HEUER, A. H.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 1, pp 43-53, issn 1073-5623, 11 p.Article

On tension/compression asymmetry of an extruded nanocrystalline Al-Fe-Cr-Ti alloyLUO, H; SHAW, L; ZHANG, L. C et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2005, Vol 409, Num 1-2, pp 249-256, issn 0921-5093, 8 p.Article

Mechanical property improvement of quenchable steel by grindingZARUDI, I; ZHANG, L. C.Journal of materials science. 2002, Vol 37, Num 18, pp 3935-3943, issn 0022-2461, 9 p.Article

TEM and DTA study on the stability of Al₅Ti₃- and h-Al₂Ti-SUPERSTRUCTURES in aluminium-rich TiAl alloysSTEIN, F; ZHANG, L. C; SAUTHOFF, G et al.Acta materialia. 2001, Vol 49, Num 15, pp 2919-2932, issn 1359-6454Article

Prevention of precipitated withdrawal symptoms by activating central cholinergic systems during a dependence-producing schedule of morphine in ratsBUCCAFUSCO, J. J; ZHANG, L. C; SHUSTER, L. C et al.Brain research. 2000, Vol 852, Num 1, pp 76-83, issn 0006-8993Article

Hot-deformation-induced α₂/γ interfacial structure in a two-phase γ-TiAl-based alloyZHANG, L. C; CHEN, G. L; WANG, J. G et al.Materials letters (General ed.). 1998, Vol 36, Num 1-4, pp 132-136, issn 0167-577XArticle

TEM study on lamellar microstructure and α₂/γ interfacial structure in a hot-deformed two-phase γ-tial-based alloyZHANG, L. C; CHEN, G. L; WANG, J. G et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1998, Vol 247, Num 1-2, pp 1-7, issn 0921-5093Article

A high resolution electron microscopic study of the microstructure in rapidly solidified Al-Li-Cu-Mg-Zr alloysZHANG, L. C; HE, A. Q; YE, H. Q et al.Journal of materials science. 1996, Vol 31, Num 1, pp 224-231, issn 0022-2461Article

Cold rolling of foilFLECK, N. A; JOHNSON, K. L; MEAR, M. E et al.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 1992, Vol 206, Num 2, pp 119-131, issn 0954-4054Article

Refractory metal nitride rectifying contacts on GaAsZHANG, L. C; LIANG, C. L; CHEUNG, S. K et al.Journal of vacuum science and technology. B. Microelectronics processing and phenomena. 1987, Vol 5, Num 6, pp 1716-1722, issn 0734-211XArticle

Selective laser melting of an Al₈₆Ni₆Y_4.5CO₂La_1.5 metallic glass: Processing, microstructure evolution and mechanical propertiesLI, X. P; KANG, C. W; HUANG, H et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 606, pp 370-379, issn 0921-5093, 10 p.Article

Effect of Chain Morphology and Carbon-nanotube Additives on the Glass Transition Temperature of Polyethylene : nanotechnologyHERASATI, S; RUAN, H. H; ZHANG, L. C et al.Journal of nano research (Print). 2013, Vol 25, pp 137-144, issn 1662-5250, 8 p.Article

Porous gadolinia-doped ceria with adjustable pore sizes using PI-b-PEO copolymer as the structure-directing agentCHUNHUI SHEN; SHAW, Leon L; ZHANG, L. C et al.Journal of sol-gel science and technology. 2012, Vol 63, Num 1, pp 72-84, issn 0928-0707, 13 p.Article

Rate dependent deformation of a silicon nanowire under uniaxial compression: Yielding, buckling and constitutive descriptionCHI YAN TANG; ZHANG, L. C; MYLVAGANAM, Kausala et al.Computational materials science. 2012, Vol 51, Num 1, pp 117-121, issn 0927-0256, 5 p.Article

A comparative study on the low-temperature performance of LiFePO₄/C and Li₃V₂(PO₄)₃/C cathodes for lithium-ion batteriesRUI, X. H; JIN, Y; FENG, X. Y et al.Journal of power sources (Print). 2011, Vol 196, Num 4, pp 2109-2114, issn 0378-7753, 6 p.Article

Chemical effect on the material removal rate in the CMP of silicon wafersWANG, Y. G; ZHANG, L. C; BIDDUT, A et al.Wear. 2011, Vol 270, Num 3-4, pp 312-316, issn 0043-1648, 5 p.Article