Recent Advances in Polyolefins/Natural Polymer Blends Used for Packaging ApplicationSAM, S. T; NURADIBAH, M. A; ISMAIL, H et al.Polymer-plastics technology and engineering (Softcover ed). 2014, Vol 53, Num 4-7, pp 631-644, issn 0360-2559, 14 p.Article

Experiments and inelastic analysis of the loop tack test for pressure-sensitive adhesivesYOUNGJIN WOO; PLAUT, Raymond H; DILLARD, David A et al.The Journal of adhesion (Print). 2004, Vol 80, Num 3, pp 203-221, issn 0021-8464, 19 p.Article

Stand und Perspektiven des Gummirecyclings = State and prospects of rubber recyclingFORMER, C; OSEN, E.KGK. Kautschuk, Gummi, Kunststoffe. 2003, Vol 56, Num 3, pp 81-89, issn 0948-3276, 8 p.Conference Paper

Challenges facing suppliers of medical polymers for the new millenniumJONES, G.Polymers for the medical industry. Conference. 1999, pp 14.1-14.3Conference Paper

Pvc-Plastisole : Problemlöser im Automobilbau = PVC-Plastisols : problem solvers in the automotive industryKRÄHLING, H; SAFFERT, R; SPINDLER, E.-J et al.Kautschuk und Gummi, Kunststoffe. 1999, Vol 52, Num 7-8, pp 477-481, issn 0022-9520, 4 p.Conference Paper

SPS: jetzt da, die S7 = SPS: here is the S7HEIDER, A.Plastverarbeiter. 1995, Vol 46, Num 8, pp 46-49, issn 0032-1338, 3 p.Article

Poly(amido amine)-Based Mannose-Glycodendrimers As Multielectron Redox Probes for Improving Lectin SensingMARTOS-MALDONADO, Manuel C; CASAS-SOLVAS, Juan M; QUESADA-SORIANO, Indalecio et al.Langmuir. 2013, Vol 29, Num 4, pp 1318-1326, issn 0743-7463, 9 p.Article

Network Polymers towards High Performance MaterialsGOETHALS, Eric; ENDO, Takeshi; TAKEICHI, Tsutomu et al.Reactive & functional polymers. 2013, Vol 73, Num 2, issn 1381-5148, 178 p.Serial Issue

Polymer Process Engineering Conference 2007COATES, Phil.Plastics, rubber and composites. 2008, Vol 37, Num 2-4, issn 1465-8011, 153 p.Conference Proceedings

A study on crystalline structure of iPP surface layer in Al/iPP/Al under the influence of microwave irradiationHE, Qi-Jia; ZHANG, Ai-Min; GUO, Ling-Hong et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 3, pp 951-961, issn 0360-2559, 11 p.Article

Allibert : Prêt à repartir de plus belleMATHIEU, Philippe.Plastiques & élastomères magazine. 2004, Vol 56, Num 4, issn 1282-9277, p. 47Article

Automobile: Durabilité des polymèresLEMAIRE, J.Plastiques & élastomères magazine. 2004, Vol 56, Num 5, pp 19-22, issn 1282-9277, 4 p.Article

Le PP respire la santéVAN LIERDE, Stijn.Plastiques & élastomères magazine. 2004, Vol 56, Num 6, pp 68-70, issn 1282-9277, 3 p.Article

Corrosive effect of different media on polyvinyl chloride pipesMAHMOUD, Mahmoud K; TANTAWI, S. H.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 4, pp 1255-1275, issn 0360-2559, 21 p.Article

Development of a system for measurement of permeability of aroma compounds through multilayer polymer films by coupling dynamic vapour sorption with purge-and-trap/fast gas chromatographyQIAOXUAN ZHOU; GUTHRIE, Brian; CADWALLADER, Keith R et al.Packaging technology & science. 2004, Vol 17, Num 4, pp 175-185, issn 0894-3214, 11 p.Article

Dielectric relaxation behavior studies in amorphous terpolymer of poly(vinyl chloride-co-vinyl acetate-co-2-hydroxypropyl acrylate) using dielectric spectroscopy and thermally stimulated current techniquesMIGAHED, M. D; AHMED, M. T.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 4, pp 1053-1066, issn 0360-2559, 14 p.Article

Effect of epoxidized natural rubber (ENR) and ethylene-co-acrylic acid copolymer on properties of silica-filled natural rubber/recycle rubber powder blendsISMAIL, Hanafi; NORDIN, R.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 2, pp 285-300, issn 0360-2559, 16 p.Article

Effect of filling factor on the determination of shear rate and viscosity from batch mixerSANCHES VALERA, Ticiane; DEMARQUETTE, Nicole Raymonde; TOFFOLI, Samuel Marcio et al.Journal of polymer engineering. 2004, Vol 24, Num 4, pp 409-433, issn 0334-6447, 25 p.Article

Enhancing environmental performance of formaldehyde-based adhesives in lignocellulosic compositesBASTA, Altaf H; EL-SAIED, Houssni; GOBRAN, Riad H et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 3, pp 821-845, issn 0360-2559, 25 p.Article

Formaldehyde-free environmentally friendly composites based on agricultural waste. I: Novel adhesive systemBASTA, Altaf H; EL-SAIED, Houssni; GOBRAN, Riad H et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 3, pp 745-777, issn 0360-2559, 33 p.Article

High water absorbents from lignocelluloses. II: Novel soil conditioners for sandy soil from lignocellulosic wastesEL-SAIED, Houssni; WALEY, Ahamed I; BASTA, Altaf H et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 3, pp 779-795, issn 0360-2559, 17 p.Article

Hydrolytic depolymerization of poly(ethylene terephthalate) waste at high temperature under autogenous pressureGOJE, A. S; THAKUR, S. A; DIWARE, V. R et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 4, pp 1093-1113, issn 0360-2559, 21 p.Article

Improvement of physicochemical properties of rubber blends between nonirradiated and irradiated rubber latexes by radiation vulcanizationHAQUE, M. A; AHMAD, M. U; AKHTAR, F et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 5, pp 1345-1353, issn 0360-2559, 9 p.Article

Kinetics and thermodynamics of hydrolytic depolymerization of polyurethane foam at higher temperature and pressureMISHRA, S; ZOPE, V. S; KULKARNI, R. D et al.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 4, pp 1001-1011, issn 0360-2559, 11 p.Article

Novel unsaturated polyester amide resins based on epoxy resinsPATEL, H. S; PANCHAL, K. K.Polymer-plastics technology and engineering (Softcover ed). 2004, Vol 43, Num 4, pp 1177-1185, issn 0360-2559, 9 p.Article